Skip to content
Shop without credit today with acima! CLICK HERE to learn how! OPEN SUNDAYS THROUGH 12.31.24; 10-4 PM
Shop without credit today with acima! CLICK HERE to learn how! OPEN SUNDAYS THROUGH 12.31.24; 10-4 PM
Traxxas 5270R Complete EZ Start System with Controller, Drive Unit and Harness
$0.00 - $0.00
$0.00
$49.95
$49.95 - $49.95
$49.95
by Traxxas

Traxxas 5270R Complete EZ Start System with Controller, Drive Unit and Harness

EZ-Start, Easy, Reliable, Push-Button Engine Starting

The Traxxas EZ-Start® system brings the power, convenience and safety of push-button electric starting to the TRX 2.5, 2.5R, or 3.3 Racing Engines. Simply plug in the hand-held control unit, push the button, and the EZ-Start system automatically heats the glow plug and the lightweight, compact on-board drive spins the engine. Traxxas' exclusive Smart Start™ technology monitors critical starting functions, automatically sensing and diagnosing potential problems for trouble-free engine starting every time.

The EZ-Start® requires a fully-charged, 7.2-volt, 6-cell battery pack and a charger (not included). A single charge should provide a full day of starting.

Traxxas EZ-Start Features

  • Power for the EZ-Start system comes from a 7.2-volt rechargeable battery pack installed in the hand-held control unit.
  • The engine glow plug is heated automatically by the EZ?Start system, eliminating the need to keep up with a separate glow plug igniter.
  • The voltage to the glow plug is kept constant, regardless of the load placed on the starter by the starter motor.
  • The “Glow Plug” LED (light emitting diode) on the control unit indicates the condition of the glow plug.
  • The “Motor” LED indicates the status of the EZ-Start electric starter motor.
  • The cush drive mechanism in the drive unit prevents damage to the gears caused by engine kickback.
  • Smart Start™ protection circuitry prevents damage to the motor by cutting power if the load on the motor or other electronics exceeds safe limits.

Using the EZ-Start

The EZ-Start controller plugs into a 4-prong receptacle on your vehicle. When the red button on the controller is pressed, the EZ-Start motor begins to spin the engine and power from the control unit heats the glow plug. Assuming all settings and preparations are correct, the engine will start almost immediately.