HPI 161293 Plazma 7.4V 360mAh 10C 2S LiPo Battery Pack with JST

The HPI Plazma 2S LiPo Battery Pack is a replacement designed for the HPI Stage-D24 1/24 Mini drift car platforms. This battery combines a compact size with reliable power delivery, providing consistent performance.

SPECIFICATIONS:

• Nominal Voltage: 7.4V (2S)
• Capacity: 360mAh
• Maximum Charge Rate: 1C
• Discharge Rates
  • Continuous: 10C
• Watt Hours: 2.66Wh
• Connectors
  • Battery: JST
  • Balance: JST-XH
• Dimensions (LxWxH): 1.7x0.78x0.43in (45x20x11mm)

IMPORTANT LITHIUM POLYMER SAFETY INFORMATION

DO NOT leave a battery in your model when charging
DO NOT leave lithium batteries unattended when charging
ALWAYS balance charge lithium battery
ALWAYS use a LiPo Safe charging bag/box
YOU MUST use a Li-Poly specific charger to charge lithium batteries (NiMH or NiCD only chargers WILL NOT WORK!)
YOU MUST not over discharge lithium battery packs
READ & UNDERSTAND the instructions carefully before operating this battery

NOTE: When using high energy Li-Polymer Batteries, please do not over-discharge or over-charge batteries as this will result in overheated batteries. Discharging capacity can't exceed 80% of the max capacity of the pack after full charging to ensure a good cycle performance. It is recommended to fully charge a brand new battery before using and only discharge the battery 50% for the first 5 cycles. Always monitor race time and/or set a low voltage warning on ESC (End voltage cannot be lower than 3.2v per cell). Do not use a battery that has too low a voltage. Do not expose batteries to sunshine or store/charge batteries at temperatures above 35°C or in a closed car. The high-temperature environment could cause damage to the pack or make it burst. If the battery becomes hot while fast charging, high current discharging, or racing, do not charge it until it has cooled completely. Wait about 20 mins, then inspect prior to recharging.