DragRace Concepts 365 4mm Transmission Spacer for Slash

This 4mm transmission spacer will lower the overall rear ride height of your Slash based Street Eliminator.

INCLUDES:

• 4mm Transmission Spacer
• (4) 4mm x 12mm Countersunk Screws
• (2) 3mm x 12mm Button Head Screws

Racers using the Drag Pak Slash Mid Motor chassis will need the Extended Transmission Brace #366.

Racers using the Drag Pak Slash Standard Motor Chassis will need:

• (4) .080 King Pin Spacers
• (2) 4-40 x 1/2 Screws.