{"product_id":"nce-5240412-eprom-upgrade-chip-for-power-pro-and-cs02","title":"NCE 5240412 EPROM Upgrade Chip for Power Pro and CS02","description":"\u003ch1\u003eNCE 5240412 EPROM Upgrade Chip for Power Pro and CS02\u003c\/h1\u003e\n\u003cp\u003eEPROM 5 amp Powerhouse PH-Pro PH10 CS02 System Firmware Chip\u003c\/p\u003e\n\u003cp\u003eFEATURES:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSupport for new DCC time packet for simplified automation\u003c\/li\u003e\n\u003cli\u003eOptional ‘purging’ of unused cabs to speed up system response\u003c\/li\u003e\n\u003cli\u003eSetting of all 1024 CVs in any programming mode\u003c\/li\u003e\n\u003cli\u003eImproved startup for Cab06 cabs\u003c\/li\u003e\n\u003cli\u003eAbility to disable Momentum button on cabs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhen using a long address and programming a new long address in OPs mode a second program packet group is sent to program CV18. This solves a problem with newer Blueline locomotives.\u003c\/p\u003e\n\u003cp\u003eA new setup parameter in SET CMD STA has been added to disable issuing of speed and function packets when a new loco has been selected.\u003c\/p\u003e\n\u003cp\u003eIn the SET CMD STA menu there is now a setting to disable the Momentum button.\u003c\/p\u003e\n\u003cp\u003eA new cab bus command has been added primarily for Cab06 cabs. If the cab sends 0x6e for the first byte of the reponse the command station will expect 5 more bytes in the type'c' format. This will greatly speed up Cab06 SELECT LOCO and SELECT ACCY process. You will need Cab06 version 2.1 or higher to use this feature.\u003c\/p\u003e\n\u003cp\u003eA cab ‘purge’ timer has now been implemented. If a cab is unplugged or the radio turned for a period of time between 1 and 9 minutes it will be removed from the normal polling rotation. If the cab is later turned back on or plugged in will be placed back into regular service. The default for this feature is off. This will reduce cab bus latency due to radio cabs that have automatically powered down or operators that have stopped operating (taking a break or gone home?). A setup menu is added for the cab purge time in the SET_CMD_STA menu settings. Valid entries are from 1 to 9 minutes with 0 to disable the feature.\u003c\/p\u003e\n\u003cp\u003eThe DCC time packet has been added. A DCC packet containing the current time (hours, minutes and clock ratio) and day of the week is sent out on the track every 1 minute of fast clock time and when the clock is stopped. This allows simple automation to be performed by decoders that respond to this packet. The feature cab enable or disabled via a setup parameter the SET CMD STA menu. There is an additional item in the SET CLOCK menu for setting the day of the week Valid entries are from 1 to 6 minutes with 0=Monday, 2=Tuesday etc.\u003c\/p\u003e","brand":"NCE (North Coast Engineering)","offers":[{"title":"Default Title","offer_id":51038443733205,"sku":"NCE5240412","price":29.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0520\/1972\/4454\/files\/nce-5240412-eprom-upgrade-chip-for-power-pro-and-cs02.png?v=1738331924","url":"https:\/\/www.whiterosehobbies.com\/products\/nce-5240412-eprom-upgrade-chip-for-power-pro-and-cs02","provider":"White Rose Hobbies","version":"1.0","type":"link"}