{"title":"3D Printing","description":"Shop 3D printers and accessories to bring all of your creations to life! \u003cbr\u003e\u003cbr\u003eCheck out the high quality COEX 3D made in the USA Filaments!","products":[{"product_id":"army-green-pla","title":"COEX 3D Army Green PLA 3D Filament","description":"\u003ch1\u003eCOEX 3D Army Green PLA 3D Filament\u003c\/h1\u003e\n\u003cp\u003eThe most environment-friendly 3D filament solution. Because of its low toxicity and ease of printing, PLA (Polylactic Acid) filament is a very popular choice in the 3D printing community. It looks great, is extremely easy to print with, and has generally good mechanical properties. It's perfect for prototypes and decorative models.\u003c\/p\u003e\n\u003cp\u003eCoex 3D Army Green PLA is made with Virgin NatureWorks USA Ingeo resin and high-quality colorant only, with no fillers. All of Coex's filament is made in a production facility located in Wisconsin, USA. Coex 3D uses industrial-grade extruders and laser measuring quality control to ensure quality, consistency, and a 1.75±0.03mm diameter specification with every spool. COEX 3D provides filament that gives excellent-looking and strong prints.\u003c\/p\u003e\n\u003cp\u003eCoex 3D recommends the following print settings when printing with their PLA. Settings will vary depending on your specific printing setup.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHotend Temperature: 215 °C - 235 °C\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eImportant! This temperature range may seem hotter than you're used to for other PLA filaments. Using 100% virgin resin causes our PLA to require slightly higher printing temperatures. \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eHeated Bed Temperature: 40 °C - 60 °C\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eNote: A heated bed is not a strict requirement when printing PLA, but using one is recommended.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eRecommended Build Surfaces\/Adhesives\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eGlass Build Surface\u003c\/li\u003e\n\u003cli\u003ePEI Build Surface\u003c\/li\u003e\n\u003cli\u003eMagigoo\u003c\/li\u003e\n\u003cli\u003ePainter's Tape\u003c\/li\u003e\n\u003cli\u003eGlue Stick\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eCooling Fan: Recommended. Up to 100% fan speed is advisable when printing PLA.\u003c\/li\u003e\n\u003cli\u003eDrying: PLA filament is hygroscopic and will absorb moisture from the air if not stored in a dry environment. If this happens, you may experience under-extrusion\/inconsistent extrusion or excess stringing. You may also hear a \"popping\" sound coming from the hotend during printing. We recommend drying PLA at 55 °C for at least 3 hours if it has been exposed to excess humidity.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":46289625350357,"sku":"sku-41331730874551","price":24.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g","offer_id":46289921900757,"sku":"sku-41331730841783","price":19.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 5lb","offer_id":46289922359509,"sku":"sku-41331730907319","price":54.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 1kg","offer_id":46289922621653,"sku":"sku-41331730940087","price":24.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 5lb","offer_id":51709734256853,"sku":"CX02-4400-30-5LB","price":54.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0520\/1972\/4454\/files\/Army-Green-PLA-COEX-3D-166701466.jpg?v=1711026466"},{"product_id":"army-green-pla-prime","title":"COEX 3D Army Green PLA Prime 3D Filament","description":"\u003ch1\u003eCOEX 3D Army Green PLA Prime 3D Filament\u003c\/h1\u003e\n\u003cp\u003ePolylactic Acid is a biodegradable, eco-friendly plastic, known for its ease of use and low warpage quality. PLA Prime is COEX 3D's high performance PLA 3D printing filament. It is made from Natureworks Ingeo 3D850 and shows improved heat resistance, more toughness, good adhesion and less warping or curling than traditional PLA. PLA was always the go-to basic filament and is still recommended when you start your journey with 3D printing, without needing to change any of your profiles you can up your game by printing with Coex 3D PLA Prime - available in most of their standard PLA colors. This high performance material will be perfect for that special print or prototype that you've been wanting to make but weren't sure if PLA was the best material for the job. Please realize though that all grades of PLA will still have limitations. If you truly need high strength and high heat resistance you may want to explore other materials for your project or part.\u003c\/p\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":46289625284821,"sku":"sku-41355022434487","price":32.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0520\/1972\/4454\/files\/Army-Green-PLA-Prime-coex3d-87116092.jpg?v=1711026466"},{"product_id":"banana-yellow-petg","title":"COEX 3D Banana Yellow PETG 3D Filament","description":"\u003ch1\u003eCOEX 3D Banana Yellow PETG 3D Filament\u003c\/h1\u003e\n\u003cp\u003ePETG (PolyEthylene Terephthalate plus Glycol) is a co-polyester used in 3D printing for its durability, impact resistance, and temperature resistance. PETG is the second most popular 3D printing filament behind the ubiquitous PLA. It has qualities comparable to ABS but can be printed without an enclosure or fume handling requirements. Unlike ABS, however, PETG cannot be vapor smoothed using acetone.\u003c\/p\u003e\n\u003cp\u003eCoex 3D Banana Yellow PETG is made with Virgin resin and high-quality colorant only, with no fillers. All of Coex's filament is made in a production facility located in Wisconsin, USA. Coex 3D uses industrial-grade extruders and laser measuring quality control to ensure quality, consistency, and a 1.75±0.03mm diameter specification with every spool. Coex 3D provides filament that gives excellent-looking and strong prints.\u003c\/p\u003e\n\u003cp\u003eCoex 3D recommends the following settings when printing with this PETG. Settings will vary depending on your specific print setup.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHotend Temperature: 230°C - 245°C\u003c\/li\u003e\n\u003cli\u003eBed Temperature: 70°C - 90°C\u003c\/li\u003e\n\u003cli\u003eHeated Bed Recommended\u003c\/li\u003e\n\u003cli\u003eRecommended Build Surfaces\/Adhesives:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003ePEI Build Surface\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eGlass Build Surface\u003c\/li\u003e\n\u003cli\u003eMagigoo\u003c\/li\u003e\n\u003cli\u003eGlue Stick\u003c\/li\u003e\n\u003cli\u003ePainter's Tape\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eCooling Fan: Recommended. PETG works best with slightly less cooling than PLA. 50-75% fan speed is recommended.\u003c\/li\u003e\n\u003cli\u003eIMPORTANT NOTE! PETG can fuse to glass and PEI print surfaces, causing damage to the print bed when the part is removed. For that reason, Coex 3D recommends always using an additional adhesion agent (such as glue stick or Magigoo) which will help the finished part to release from the print bed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOther Printing Tips\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePETG is slightly more hygroscopic than PLA, so drying your filament can be necessary if it is exposed to humidity. Coex 3D recommends drying our PETG at 65 °C for at least 3 hours. You can tell when your filament needs drying if you experience under-extrusion\/inconsistent extrusion, and\/or excess stringing. Hearing a \"popping\" sound during a print is another sign of filament that needs to be dried.\u003c\/li\u003e\n\u003cli\u003ePETG can often result in more stringing than would be expected with PLA or similar filaments. There are a few steps you can take to reduce stringing:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eReduce print temperature. Keep in mind that reducing print temperature will slightly decrease layer adhesion and part strength, but can help reduce stringing.\u003c\/li\u003e\n\u003cli\u003eIncrease retraction. Increasing retraction length can help reduce stringing, especially on Bowden-style extrusion configurations.\u003c\/li\u003e\n\u003cli\u003eEnable \"Wipe while Retracting\" in your slicer. Most slicers allow for this option, which will start a travel move just before\/during the filament retraction. This helps \"wipe off\" the nozzle as a travel move starts, reducing stringing.\u003c\/li\u003e\n\u003cli\u003eEnable \"Combing Mode\" (Cura) or \"Avoid Crossing Perimeters\" (PrusaSlicer\/SuperSlicer\/etc.). Rather than travel moves always going in a straight line, this will cause them to choose a path that avoids crossing over perimeters, effectively keeping the nozzle \"inside\" the print area wherever possible. This eliminates stringing right at the source but still cannot eliminate it all (such as between multiple parts).\u003c\/li\u003e\n\u003cli\u003eUnfortunately in many cases stringing is impossible to fully eliminate, so some post-processing of prints is often necessary.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":46289625481429,"sku":"sku-41279434817719","price":33.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 5lb","offer_id":46289921147093,"sku":"sku-41279434850487","price":71.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g","offer_id":46289921605845,"sku":"sku-41279434883255","price":21.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 1kg","offer_id":46289921704149,"sku":"sku-41279434916023","price":33.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 5lb","offer_id":46289921999061,"sku":"sku-41279434948791","price":71.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0520\/1972\/4454\/files\/Banana-Yellow-PETG-coex3d-87102058.jpg?v=1711026466"},{"product_id":"black-abs","title":"COEX 3D Black ABS 3D Filament","description":"\u003ch1\u003eCOEX 3D Black ABS 3D Filament\u003c\/h1\u003e\n\u003cp\u003eABS filament is a thermoplastic 3d printer filament ABS, which stands for Acrylonitrile Butadiene Styrene. It easily molds when heated and sets evenly when cooled. ABS filament is used by a variety of manufacturing industries for parts requiring structural integrity and detail and is ideal for “wear and tear” projects. It is commonly used in rapid prototyping and additive manufacturing environments to test product impact resistance and durability. It is also popular with 3D printing hobbyist who utilize 3D printing in their home or at a local maker faire. This 3D printer filament comes in a variety of colors and is available in 1.75 and 2.85 MM in diameter, and comes in 500 g, 5 lbs, 15 lbs and 1 kg.\u003c\/p\u003e\n\u003cp\u003eAs opposed to PLA and PETG filament, ABS is a bit more technical and may be more challenging for new 3D printing users and requires the use of an enclosed 3D printer.\u003c\/p\u003e\n\u003cp\u003eABS is a stiff 3D printing material and it is impact and heat resistant. Common applications for ABS include end-use tools, moving parts, and parts that must withstand high mechanical stress.\u003c\/p\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":46289625776341,"sku":"sku-41279435342007","price":30.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g","offer_id":46289920786645,"sku":"sku-41279435374775","price":22.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 5lb","offer_id":46289920950485,"sku":"sku-41280557613239","price":68.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 8lb","offer_id":46289921245397,"sku":"sku-41280557646007","price":109.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 1kg","offer_id":46289921671381,"sku":"sku-41280557711543","price":30.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 5lb","offer_id":46289921966293,"sku":"sku-41280557744311","price":68.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 15lb","offer_id":46289922392277,"sku":"sku-41280557842615","price":203.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 8lb","offer_id":46289922588885,"sku":"sku-41296599351479","price":109.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 22lb","offer_id":46289922818261,"sku":"sku-41973564211383","price":296.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 15lb","offer_id":46289923047637,"sku":"sku-42335420743863","price":203.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 22lb","offer_id":48478263279829,"sku":"sku-43131670724791","price":296.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0520\/1972\/4454\/files\/Black-ABS-coex3d-87102522.jpg?v=1711026466"},{"product_id":"black-chrome-pla-silk","title":"COEX 3D Black Chrome PLA+Silk 3D Filament","description":"\u003ch1 id=\"tinymce_scroll_sign\"\u003eCOEX 3D Black Chrome PLA+Silk 3D Filament\u003c\/h1\u003e\n\u003cp\u003eExperience the Best Quality Black Chrome PLA+Silk Filament\u003c\/p\u003e\n\u003cp\u003ePLA+Silk gives a glossy shine to anything you print with it. It looks great, is extremely easy to print with, and has generally good mechanical properties. It's perfect for showpieces and decorative models.\u003c\/p\u003e\n\u003cp\u003eCoex 3D PLA+Silk is made with Virgin NatureWorks USA Ingeo resin, a high-quality colorant, and our secretive additive. All of Coex's filament is made in a production facility located in Wisconsin, USA. Coex 3D uses industrial-grade extruders and laser measuring quality control to ensure quality, consistency, and a 1.75±0.03mm diameter specification with every spool. We provide filament that gives excellent-looking and strong prints.\u003c\/p\u003e\n\u003cp\u003eCoex 3D recommends the following print settings when printing with this PLA. Settings will vary depending on your specific printing setup.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHotend Temperature: 215°C - 235°C\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eImportant! This temperature range may seem hotter than you're used to for other PLA+Silk filaments. Using 100% virgin resin causes our PLA+Silk to require slightly higher printing temperatures. \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eHeated Bed Temperature: 40 °C - 60 °C\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eNote: A heated bed is not a strict requirement when printing PLA+Silk, but using one is recommended.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eRecommended Build Surfaces\/Adhesives\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eGlass Build Surface\u003c\/li\u003e\n\u003cli\u003ePEI Build Surface\u003c\/li\u003e\n\u003cli\u003eMagigoo\u003c\/li\u003e\n\u003cli\u003ePainter's Tape\u003c\/li\u003e\n\u003cli\u003eGlue Stick\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eCooling Fan: Recommended. Up to 100% fan speed is advisable when printing PLA+Silk.\u003c\/li\u003e\n\u003cli\u003eDrying: PLA+Silk filament is hygroscopic and will absorb moisture from the air if not stored in a dry environment. If this happens, you may experience under-extrusion\/inconsistent extrusion or excess stringing. You may also hear a \"popping\" sound coming from the hotend during printing. Coex 3D recommends drying this PLA at 55 °C for at least 3 hours if it has been exposed to excess humidity.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":46289625809109,"sku":"sku-41908627439799","price":30.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g","offer_id":46289920000213,"sku":"sku-41908627472567","price":21.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 9lb","offer_id":49418569711829,"sku":"CX03-0360-18-9LB","price":120.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 15lb","offer_id":49417072935125,"sku":"CX03-0360-18-15LB","price":200.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 1kg","offer_id":46289920688341,"sku":"sku-41914586628279","price":30.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 15lb","offer_id":48545102627029,"sku":"CX03-0360-30-15LB","price":200.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0520\/1972\/4454\/files\/Black-Chrome-PLA_Silk-coex3d-87129816.webp?v=1711026467"},{"product_id":"black-asa-prime","title":"COEX 3D Black ASA Prime 3D Filament","description":"\u003ch1\u003eCOEX 3D Black ASA Prime 3D Filament\u003c\/h1\u003e\n\u003cp\u003eExperience Durability with Black ASA Prime\u003c\/p\u003e\n\u003cp\u003eASA filament (acrylonitrile styrene acrylate) is a thermoplastic 3D printing material that is perfect in many ways and is suitable for many different applications. It has a similar chemical makeup to ABS plastic but offers three notable improvements: better mechanical properties, it is naturally UV resistant, and it simply produces amazing finished prints. Coex 3D offers ASA in the same colors as ABS giving you 11 colors to choose from and is available in both 1.75mm and 2.85mm diameters in varying spool sizes.\u003c\/p\u003e\n\u003cp\u003eAlthough ASA can safely be printed using an open bed printer, it is still recommended to print ASA in an enclosed printer which will allow parts to cool slowly and uniformly which helps to prevent shrinkage and warping.\u003c\/p\u003e\n\u003cp\u003eCoex 3D’s ASA products are made with 100% virgin resin and high-quality colorants with no added fillers. All Coex 3D filament is made in a production facility in Green Bay, WI, USA using industrial-grade extruders and laser measuring quality control to ensure quality and consistency with every spool.\u003c\/p\u003e\n\u003cp\u003eLooking for a high-performance 3D printing polymer that provides excellent UV stability and weather resistance? Look no further than Black ASA Prime, the perfect choice for your 3D printing needs.\u003c\/p\u003e\n\u003cp\u003eThis Black ASA Prime is an Acrylonitrile Styrene Acrylate (ASA) polymer that is specifically formulated for 3D printing. It offers the ideal balance of mechanical strength, toughness, stiffness, and weather resistance that you can rely on for extended periods.\u003c\/p\u003e\n\u003cp\u003eBlack ASA Prime is well-suited for outdoors and automotive applications thanks to its exceptional weather resistance and UV stability. Coex 3D’s ASA polymer is perfect for creating functional prototypes, end-use parts, and low-volume production runs.\u003c\/p\u003e\n\u003cp\u003eIf you are looking for a material that can withstand harsh weather conditions, retain its color and mechanical properties in direct sunlight, and provide long-lasting performance, then Black ASA Prime is the right choice for you. With its easy-to-print characteristics and excellent layer adhesion, this ASA filament offers great value for money.\u003c\/p\u003e\n\u003cp\u003eGet your hands on Black ASA Prime today and experience the optimal balance of rigidity, toughness, UV resistance, and weather ability. Buy now and start creating durable, high-quality 3D prints that will last for years to come!\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003eCoex 3D recommends the following print settings when printing with ASA. Settings will vary depending on your specific printing setup.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHotend Temperature: 235 °C - 245 °C\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eImportant! This temperature range may seem hotter than you're used to for other ASA filaments. Using 100% virgin resin causes this ASA to require slightly higher printing temperatures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeated Bed Temperature: 80 °C - 1000 °C\u003c\/li\u003e\n\u003cli\u003eRecommended Build Surfaces\/Adhesives\n\u003cul\u003e\n\u003cli\u003eGlass Build Surface\u003c\/li\u003e\n\u003cli\u003ePEI Build Surface\u003c\/li\u003e\n\u003cli\u003eMagigoo\u003c\/li\u003e\n\u003cli\u003ePainter's Tape\u003c\/li\u003e\n\u003cli\u003eGlue Stick\u003c\/li\u003e\n\u003cli\u003eABS slurry\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eCooling Fan: Recommended.\u003c\/li\u003e\n\u003cli\u003eEnclosure: Recomended to prevent warping\u003c\/li\u003e\n\u003cli\u003eDrying: ASA filament is hygroscopic and will absorb moisture from the air if not stored in a dry environment. If this happens, you may experience under-extrusion\/inconsistent extrusion or excess stringing. You may also hear a \"popping\" sound coming from the hotend during printing. Coex 3D recommends drying this ASA at 65 °C for at least 3 hours if it has been exposed to excess humidity.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":46289625710805,"sku":"sku-41868041584823","price":34.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g","offer_id":46289919803605,"sku":"sku-41868041552055","price":21.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 1kg","offer_id":46289920032981,"sku":"sku-41868041617591","price":34.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 5lb","offer_id":46289920721109,"sku":"sku-41930123739319","price":75.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 5lb","offer_id":46289920884949,"sku":"sku-42018044870839","price":75.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 15lb","offer_id":47663141191893,"sku":"sku-42904653103287","price":225.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 8lb","offer_id":48857141018837,"sku":"CX04-0300-18-8LB","price":120.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0520\/1972\/4454\/files\/Black-ASA-Prime-COEX-3D-87125955.jpg?v=1711026467"},{"product_id":"black-petg","title":"COEX 3D Black PETG 3D Filament","description":"\u003ch1\u003eCOEX 3D Black PETG 3D Filament\u003c\/h1\u003e\n\u003cp\u003ePETG (PolyEthylene Terephthalate plus Glycol) is a co-polyester used in 3D printing for its durability, impact resistance, and temperature resistance. PETG is the second most popular 3D printing filament behind the ubiquitous PLA. It has qualities comparable to ABS but can be printed without an enclosure or fume handling requirements. Unlike ABS, however, PETG cannot be vapor smoothed using acetone.\u003c\/p\u003e\n\u003cp\u003eCoex 3D Black PETG is made with Virgin resin and high-quality colorant only, with no fillers. All of Coex's filament is made in a production facility located in Wisconsin, USA. Coex 3D uses industrial-grade extruders and laser measuring quality control to ensure quality, consistency, and a 1.75±0.03mm diameter specification with every spool. Coex 3D provides filament that gives excellent-looking and strong prints.\u003c\/p\u003e\n\u003cp\u003eCoex 3D recommends the following settings when printing with this PETG. Settings will vary depending on your specific print setup.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHotend Temperature: 230 °C - 245 °C\u003c\/li\u003e\n\u003cli\u003eBed Temperature: 70 °C - 90 °C\u003c\/li\u003e\n\u003cli\u003eHeated Bed Recommended\u003c\/li\u003e\n\u003cli\u003eRecommended Build Surfaces\/Adhesives:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003ePEI Build Surface\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eGlass Build Surface\u003c\/li\u003e\n\u003cli\u003eMagigoo\u003c\/li\u003e\n\u003cli\u003eGlue Stick\u003c\/li\u003e\n\u003cli\u003ePainter's Tape\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eCooling Fan: Recommended. PETG works best with slightly less cooling than PLA. 50-75% fan speed is recommended.\u003c\/li\u003e\n\u003cli\u003eIMPORTANT NOTE! PETG can fuse to glass and PEI print surfaces, causing damage to the print bed when the part is removed. For that reason, Coex 3D recommends always using an additional adhesion agent (such as glue stick or Magigoo) which will help the finished part to release from the print bed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOther Printing Tips\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePETG is slightly more hygroscopic than PLA, so drying your filament can be necessary if it is exposed to humidity. Coex 3D recommends drying our PETG at 65 °C for at least 3 hours. You can tell when your filament needs drying if you experience under-extrusion\/inconsistent extrusion, and\/or excess stringing. Hearing a \"popping\" sound during a print is another sign of filament that needs to be dried.\u003c\/li\u003e\n\u003cli\u003ePETG can often result in more stringing than would be expected with PLA or similar filaments. There are a few steps you can take to reduce stringing:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eReduce print temperature. Keep in mind that reducing print temperature will slightly decrease layer adhesion and part strength, but can help reduce stringing.\u003c\/li\u003e\n\u003cli\u003eIncrease retraction. Increasing retraction length can help reduce stringing, especially on Bowden-style extrusion configurations.\u003c\/li\u003e\n\u003cli\u003eEnable \"Wipe while Retracting\" in your slicer. Most slicers allow for this option, which will start a travel move just before\/during the filament retraction. This helps \"wipe off\" the nozzle as a travel move starts, reducing stringing.\u003c\/li\u003e\n\u003cli\u003eEnable \"Combing Mode\" (Cura) or \"Avoid Crossing Perimeters\" (PrusaSlicer\/SuperSlicer\/etc.). Rather than travel moves always going in a straight line, this will cause them to choose a path that avoids crossing over perimeters, effectively keeping the nozzle \"inside\" the print area wherever possible. This eliminates stringing right at the source but still cannot eliminate it all (such as between multiple parts).\u003c\/li\u003e\n\u003cli\u003eUnfortunately in many cases stringing is impossible to fully eliminate, so some post-processing of prints is often necessary.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":46289625972949,"sku":"sku-41279436030135","price":33.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g","offer_id":46289919279317,"sku":"sku-41279436062903","price":21.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 5lb","offer_id":46289919770837,"sku":"sku-41276021964983","price":71.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 9lb","offer_id":46289919967445,"sku":"sku-41279436095671","price":127.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 15lb","offer_id":46289920655573,"sku":"sku-41296613966007","price":206.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 1kg","offer_id":46289920852181,"sku":"sku-41279436161207","price":33.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 5lb","offer_id":46289921179861,"sku":"sku-41279436193975","price":71.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 15lb","offer_id":46289921638613,"sku":"sku-41279436128439","price":206.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0520\/1972\/4454\/files\/Black-PETG-coex3d-127357619.jpg?v=1711026467"},{"product_id":"chocolate-brown-pla","title":"COEX 3D Chocolate Brown PLA 3D Filament","description":"\u003ch1\u003eCOEX 3D Chocolate Brown PLA 3D Filament\u003c\/h1\u003e\n\u003cp\u003eThe most environment-friendly 3D filament solution. Because of its low toxicity and ease of printing, PLA (Polylactic Acid) filament is a very popular choice in the 3D printing community. It looks great, is extremely easy to print with, and has generally good mechanical properties. It's perfect for prototypes and decorative models.\u003c\/p\u003e\n\u003cp\u003eCoex 3D Chocolate Brown PLA is made with Virgin NatureWorks USA Ingeo resin and high-quality colorant only, with no fillers. All of Coex's filament is made in a production facility located in Wisconsin, USA. Coex 3D uses industrial-grade extruders and laser measuring quality control to ensure quality, consistency, and a 1.75±0.03mm diameter specification with every spool. We provide filament that gives excellent-looking and strong prints.\u003c\/p\u003e\n\u003cp\u003eCoex 3D recommends the following print settings when printing with their PLA. Settings will vary depending on your specific printing setup.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHotend Temperature: 215 °C - 235 °C\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eImportant! This temperature range may seem hotter than you're used to for other PLA filaments. Using 100% virgin resin causes \u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\" data-mce-fragment=\"1\" data-mce-style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003eCoex 3D\u003c\/span\u003e PLA to require slightly higher printing temperatures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eHeated Bed Temperature: 40 °C - 60 °C\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eNote: A heated bed is not a strict requirement when printing PLA, but using one is recommended.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eRecommended Build Surfaces\/Adhesives\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eGlass Build Surface\u003c\/li\u003e\n\u003cli\u003ePEI Build Surface\u003c\/li\u003e\n\u003cli\u003eMagigoo\u003c\/li\u003e\n\u003cli\u003ePainter's Tape\u003c\/li\u003e\n\u003cli\u003eGlue Stick\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eCooling Fan: Recommended. Up to 100% fan speed is advisable when printing PLA.\u003c\/li\u003e\n\u003cli\u003eDrying: PLA filament is hygroscopic and will absorb moisture from the air if not stored in a dry environment. If this happens, you may experience under-extrusion\/inconsistent extrusion or excess stringing. You may also hear a \"popping\" sound coming from the hotend during printing. Coex 3D recommends drying our PLA at 55 °C for at least 3 hours if it has been exposed to excess humidity.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":46289626661077,"sku":"sku-41567366906039","price":24.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g","offer_id":46289918886101,"sku":"sku-41567366938807","price":19.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0520\/1972\/4454\/files\/Chocolate-Brown-PLA-coex3d-108758311.jpg?v=1711026467"},{"product_id":"black-pla","title":"COEX 3D Black PLA 3D Filament","description":"\u003ch1\u003eCOEX 3D Black PLA 3D Filament\u003c\/h1\u003e\n\u003cp\u003eThe most environment-friendly 3D filament solution. Because of its low toxicity and ease of printing, PLA (Polylactic Acid) filament is a very popular choice in the 3D printing community. It looks great, is extremely easy to print with, and has generally good mechanical properties. It's perfect for prototypes and decorative models.\u003c\/p\u003e\n\u003cp\u003eCoex 3D Black PLA is made with Virgin NatureWorks USA Ingeo resin and high-quality colorant only, with no fillers. All of Coex's filament is made in a production facility located in Wisconsin, USA. Coex 3D uses industrial-grade extruders and laser measuring quality control to ensure quality, consistency, and a 1.75±0.03mm diameter specification with every spool. Coex 3D provides filament that gives excellent-looking and strong prints.\u003c\/p\u003e\n\u003cp\u003eCoex 3D recommends the following print settings when printing with this PLA. Settings will vary depending on your specific printing setup.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHotend Temperature: 215 °C - 235 °C\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eImportant! This temperature range may seem hotter than you're used to for other PLA filaments. Using 100% virgin resin causes Coex 3D PLA to require slightly higher printing temperatures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eHeated Bed Temperature: 40 °C - 60 °C\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eNote: A heated bed is not a strict requirement when printing PLA, but using one is recommended.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eRecommended Build Surfaces\/Adhesives\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eGlass Build Surface\u003c\/li\u003e\n\u003cli\u003ePEI Build Surface\u003c\/li\u003e\n\u003cli\u003eMagigoo\u003c\/li\u003e\n\u003cli\u003ePainter's Tape\u003c\/li\u003e\n\u003cli\u003eGlue Stick\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eCooling Fan: Recommended. Up to 100% fan speed is advisable when printing PLA.\u003c\/li\u003e\n\u003cli\u003eDrying: PLA filament is hygroscopic and will absorb moisture from the air if not stored in a dry environment. If this happens, you may experience under-extrusion\/inconsistent extrusion or excess stringing. You may also hear a \"popping\" sound coming from the hotend during printing. Coex 3D recommends drying our PLA at 55 °C for at least 3 hours if it has been exposed to excess humidity.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":46289627185365,"sku":"sku-41299712409783","price":24.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g","offer_id":46551791173845,"sku":"sku-41299712442551","price":19.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 5lb","offer_id":46289918755029,"sku":"sku-41299712475319","price":54.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 8lb","offer_id":46551791468757,"sku":"sku-41839776465079","price":86.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 15lb","offer_id":46551791665365,"sku":"sku-41299712377015","price":162.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 18lb","offer_id":46551791927509,"sku":"sku-41299717095607","price":195.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 1kg","offer_id":46551792189653,"sku":"sku-41299712573623","price":24.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 5lb","offer_id":46551792451797,"sku":"sku-41299712606391","price":54.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 8lb","offer_id":46551792681173,"sku":"sku-41299712639159","price":86.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 15lb","offer_id":46551792943317,"sku":"sku-41299712540855","price":162.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 22lb","offer_id":46289920917717,"sku":"sku-41680401334455","price":240.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0520\/1972\/4454\/files\/Black-PLA-coex3d-87114382.jpg?v=1711026467"},{"product_id":"black-pla-prime","title":"COEX 3D Black PLA Prime 3D Filament","description":"\u003ch1\u003eCOEX 3D Black PLA Prime 3D Filament\u003c\/h1\u003e\n\u003cp\u003ePolylactic Acid is a biodegradable, eco-friendly plastic, known for its ease of use and low warpage quality. PLA Prime is Coex 3D's high performance PLA 3D printing filament. It is made from Natureworks Ingeo 3D850 and shows improved heat resistance, more toughness, good adhesion and less warping or curling than traditional PLA. PLA was always the go-to basic filament and is still recommended when you start your journey with 3D printing, without needing to change any of your profiles you can up your game by printing with Coex 3D PLA Prime - available in most of the standard PLA colors. Black PLA Prime will be perfect for that special print or prototype that you've been wanting to make but weren't sure if PLA was the best material for the job. Please realize though that all grades of PLA will still have limitations. If you truly need high strength and high heat resistance you may want to explore other materials for your project or part.\u003c\/p\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":46289626923221,"sku":"sku-41279436259511","price":32.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g","offer_id":46289917804757,"sku":"sku-41279436292279","price":24.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 5lb","offer_id":46289917968597,"sku":"sku-41279436325047","price":70.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 8lb","offer_id":46289918623957,"sku":"sku-41279436357815","price":122.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 15lb","offer_id":46289918853333,"sku":"sku-41279436226743","price":215.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 1kg","offer_id":46289918984405,"sku":"sku-41279436423351","price":32.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 5lb","offer_id":46289919639765,"sku":"sku-41279436456119","price":70.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 8lb","offer_id":46289919869141,"sku":"sku-41296626712759","price":114.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 15lb","offer_id":46289920229589,"sku":"sku-41279436390583","price":215.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 22lb","offer_id":53460534067413,"sku":"CX08-0300-30-22LB","price":315.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0520\/1972\/4454\/files\/Black-PLA-Prime-coex3d-118086723.jpg?v=1711026467"},{"product_id":"cobalt-blue-pla","title":"COEX 3D Cobalt Blue PLA 3D Filament","description":"\u003ch1\u003eCOEX 3D Cobalt Blue PLA 3D Filament\u003c\/h1\u003e\n\u003cp\u003eThe most environment-friendly 3D filament solution. Because of its low toxicity and ease of printing, PLA (Polylactic Acid) filament is a very popular choice in the 3D printing community. It looks great, is extremely easy to print with, and has generally good mechanical properties. It's perfect for prototypes and decorative models.\u003c\/p\u003e\n\u003cp\u003eCoex 3D Cobalt Blue PLA is made with Virgin NatureWorks USA Ingeo resin and high-quality colorant only, with no fillers. All of Coex's filament is made in a production facility located in Wisconsin, USA. Coex 3D uses industrial-grade extruders and laser measuring quality control to ensure quality, consistency, and a 1.75±0.03mm diameter specification with every spool. Coex 3D provide filament that gives excellent-looking and strong prints.\u003c\/p\u003e\n\u003cp\u003eCoex 3D recommends the following print settings when printing with this PLA. Settings will vary depending on your specific printing setup.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHotend Temperature: 215 °C - 235 °C\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eImportant! This temperature range may seem hotter than you're used to for other PLA filaments. Using 100% virgin resin causes Coex 3D PLA to require slightly higher printing temperatures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eHeated Bed Temperature: 40 °C - 60 °C\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eNote: A heated bed is not a strict requirement when printing PLA, but using one is recommended.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eRecommended Build Surfaces\/Adhesives\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eGlass Build Surface\u003c\/li\u003e\n\u003cli\u003ePEI Build Surface\u003c\/li\u003e\n\u003cli\u003eMagigoo\u003c\/li\u003e\n\u003cli\u003ePainter's Tape\u003c\/li\u003e\n\u003cli\u003eGlue Stick\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eCooling Fan: Recommended. Up to 100% fan speed is advisable when printing PLA.\u003c\/li\u003e\n\u003cli\u003eDrying: PLA filament is hygroscopic and will absorb moisture from the air if not stored in a dry environment. If this happens, you may experience under-extrusion\/inconsistent extrusion or excess stringing. You may also hear a \"popping\" sound coming from the hotend during printing. Coex 3D recommends drying our PLA at 55 °C for at least 3 hours if it has been exposed to excess humidity.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":46289626792149,"sku":"sku-41279437275319","price":24.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g","offer_id":46289917608149,"sku":"sku-41279437308087","price":19.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 5lb","offer_id":46289917870293,"sku":"sku-41279437209783","price":54.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 15lb","offer_id":46289918099669,"sku":"sku-41279437242551","price":162.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 1kg","offer_id":46289918722261,"sku":"sku-41279437340855","price":24.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 5lb","offer_id":46289918951637,"sku":"sku-41279437406391","price":54.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 15lb","offer_id":46289919246549,"sku":"sku-41279437373623","price":162.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0520\/1972\/4454\/files\/Cobalt-Blue-PLA-coex3d-87104314.jpg?v=1711026467"},{"product_id":"cobalt-blue-abs","title":"COEX 3D Cobalt Blue ABS 3D Filament","description":"\u003ch1\u003eCOEX 3D Cobalt Blue ABS 3D Filament\u003c\/h1\u003e\n\u003cp\u003eABS filament is a thermoplastic 3d printer filament ABS, which stands for Acrylonitrile Butadiene Styrene. It easily molds when heated and sets evenly when cooled. ABS filament is used by a variety of manufacturing industries for parts requiring structural integrity and detail and is ideal for “wear and tear” projects. It is commonly used in rapid prototyping and additive manufacturing environments to test product impact resistance and durability. It is also popular with 3D printing hobbyist who utilize 3D printing in their home or at a local maker faire. This 3D printer filament comes in a variety of colors and is available in 1.75 and 2.85 MM in diameter, and comes in 500 g, 5 lbs, 15 lbs and 1 kg.\u003c\/p\u003e\n\u003cp\u003eAs opposed to PLA and PETG filament, ABS is a bit more technical and may be more challenging for new 3D printing users and requires the use of an enclosed 3D printer.\u003c\/p\u003e\n\u003cp\u003eABS is a stiff 3D printing material and it is impact and heat resistant. Common applications for ABS include end-use tools, moving parts, and parts that must withstand high mechanical stress.\u003c\/p\u003e\n","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":46289626726613,"sku":"sku-41279436914871","price":30.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g","offer_id":46289917116629,"sku":"sku-41279436947639","price":22.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 5lb","offer_id":46289917771989,"sku":"sku-41279436980407","price":68.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 1kg","offer_id":46289918034133,"sku":"sku-41279437013175","price":30.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 5lb","offer_id":46289918787797,"sku":"sku-41296690905271","price":68.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0520\/1972\/4454\/files\/Cobalt-Blue-ABS-coex3d-154019169.jpg?v=1711026466"},{"product_id":"cobalt-blue-pla-prime","title":"COEX 3D Cobalt Blue PLA Prime 3D Filament","description":"\u003ch1\u003eCOEX 3D Cobalt Blue PLA Prime 3D Filament\u003c\/h1\u003e\n\u003cp\u003ePolylactic Acid is a biodegradable, eco-friendly plastic, known for its ease of use and low warpage quality. PLA Prime is Coex 3D's high performance PLA 3D printing filament. It is made from Natureworks Ingeo 3D850 and shows improved heat resistance, more toughness, good adhesion and less warping or curling than traditional PLA. PLA was always the go-to basic filament and is still recommended when you start your journey with 3D printing, without needing to change any of your profiles you can up your game by printing with Coex 3D PLA Prime - available in most of the standard PLA colors.\u003c\/p\u003e\n\u003cp\u003eThis high performance material will be perfect for that special print or prototype that you've been wanting to make but weren't sure if PLA was the best material for the job.  Please realize though that all grades of PLA will still have limitations. If you truly need high strength and high heat resistance you may want to explore other materials for your project or part.\u003c\/p\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":46289627054293,"sku":"sku-41279437439159","price":32.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g","offer_id":46289916920021,"sku":"sku-41279437471927","price":24.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 5lb","offer_id":46289917706453,"sku":"sku-41279437504695","price":70.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0520\/1972\/4454\/files\/Cobalt-Blue-PLA-Prime-coex3d-154017590.jpg?v=1711026467"},{"product_id":"cobalt-blue-petg","title":"COEX 3D Cobalt Blue PETG 3D Filament","description":"\u003ch1\u003eCOEX 3D Cobalt Blue PETG 3D Filament\u003c\/h1\u003e\n\u003cp\u003ePETG (PolyEthylene Terephthalate plus Glycol) is a co-polyester used in 3D printing for its durability, impact resistance, and temperature resistance. PETG is the second most popular 3D printing filament behind the ubiquitous PLA. It has qualities comparable to ABS but can be printed without an enclosure or fume handling requirements. Unlike ABS, however, PETG cannot be vapor smoothed using acetone.\u003c\/p\u003e\n\u003cp\u003eCoex 3D Cobalt Blue PETG is made with Virgin resin and high-quality colorant only, with no fillers. All of Coex's filament is made in a production facility located in Wisconsin, USA. Coex 3D uses industrial-grade extruders and laser measuring quality control to ensure quality, consistency, and a 1.75±0.03mm diameter specification with every spool. Coex 3D provides filament that gives excellent-looking and strong prints.\u003c\/p\u003e\n\u003cp\u003eCoex 3D recommends the following settings when printing with this PETG. Settings will vary depending on your specific print setup.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHotend Temperature: 230 °C - 245 °C\u003c\/li\u003e\n\u003cli\u003eBed Temperature: 70 °C - 90 °C\u003c\/li\u003e\n\u003cli\u003eHeated Bed Recommended\u003c\/li\u003e\n\u003cli\u003eRecommended Build Surfaces\/Adhesives:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003ePEI Build Surface\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eGlass Build Surface\u003c\/li\u003e\n\u003cli\u003eMagigoo\u003c\/li\u003e\n\u003cli\u003eGlue Stick\u003c\/li\u003e\n\u003cli\u003ePainter's Tape\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eCooling Fan: Recommended. PETG works best with slightly less cooling than PLA. 50-75% fan speed is recommended.\u003c\/li\u003e\n\u003cli\u003eIMPORTANT NOTE! PETG can fuse to glass and PEI print surfaces, causing damage to the print bed when the part is removed. For that reason, Coex 3D recommends always using an additional adhesion agent (such as glue stick or Magigoo) which will help the finished part to release from the print bed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOther Printing Tips\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePETG is slightly more hygroscopic than PLA, so drying your filament can be necessary if it is exposed to humidity. Coex 3D recommends drying PETG at 65 °C for at least 3 hours. You can tell when your filament needs drying if you experience under-extrusion\/inconsistent extrusion, and\/or excess stringing. Hearing a \"popping\" sound during a print is another sign of filament that needs to be dried.\u003c\/li\u003e\n\u003cli\u003ePETG can often result in more stringing than would be expected with PLA or similar filaments. There are a few steps you can take to reduce stringing:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eReduce print temperature. Keep in mind that reducing print temperature will slightly decrease layer adhesion and part strength, but can help reduce stringing.\u003c\/li\u003e\n\u003cli\u003eIncrease retraction. Increasing retraction length can help reduce stringing, especially on Bowden-style extrusion configurations.\u003c\/li\u003e\n\u003cli\u003eEnable \"Wipe while Retracting\" in your slicer. Most slicers allow for this option, which will start a travel move just before\/during the filament retraction. This helps \"wipe off\" the nozzle as a travel move starts, reducing stringing.\u003c\/li\u003e\n\u003cli\u003eEnable \"Combing Mode\" (Cura) or \"Avoid Crossing Perimeters\" (PrusaSlicer\/SuperSlicer\/etc.). Rather than travel moves always going in a straight line, this will cause them to choose a path that avoids crossing over perimeters, effectively keeping the nozzle \"inside\" the print area wherever possible. This eliminates stringing right at the source but still cannot eliminate it all (such as between multiple parts).\u003c\/li\u003e\n\u003cli\u003eUnfortunately in many cases stringing is impossible to fully eliminate, so some post-processing of prints is often necessary.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":46289627250901,"sku":"sku-41279437078711","price":33.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g","offer_id":46289916854485,"sku":"sku-41279437111479","price":21.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 5lb","offer_id":46289917673685,"sku":"sku-41279437045943","price":71.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 9lb","offer_id":46289917903061,"sku":"sku-41296702963895","price":127.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 15lb","offer_id":46289918656725,"sku":"sku-41296698474679","price":206.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 1kg","offer_id":46289918820565,"sku":"sku-41279437144247","price":33.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 5lb","offer_id":46289919017173,"sku":"sku-41279437177015","price":71.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 15lb","offer_id":46289919705301,"sku":"sku-41296705814711","price":206.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0520\/1972\/4454\/files\/Cobalt-Blue-PETG-coex3d-87104014.jpg?v=1711026468"},{"product_id":"electric-blue-pla-silk","title":"COEX 3D Electric Blue PLA+Silk 3D Filament","description":"\u003ch1\u003eCOEX 3D Electric Blue PLA+Silk 3D Filament\u003c\/h1\u003e\n\u003cp\u003ePLA+Silk gives a glossy shine to anything you print with it. It looks great, is extremely easy to print with, and has generally good mechanical properties. It's perfect for showpieces and decorative models.\u003c\/p\u003e\n\u003cp\u003eCoex 3D PLA+Silk is made with Virgin NatureWorks USA Ingeo resin, a high-quality colorant, and our secretive additive. All of Coex's filament is made in a production facility located in Wisconsin, USA. Coex 3D uses industrial-grade extruders and laser measuring quality control to ensure quality, consistency, and a 1.75±0.03mm diameter specification with every spool. Coex 3D provides filament that gives excellent-looking and strong prints.\u003c\/p\u003e\n\u003cp\u003eCoex 3D recommends the following print settings when printing with this PLA. Settings will vary depending on your specific printing setup.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHotend Temperature: 215 °C - 235 °C\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eImportant! This temperature range may seem hotter than you're used to for other PLA+Silk filaments. Using 100% virgin resin causes PLA+Silk to require slightly higher printing temperatures. \u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eHeated Bed Temperature: 40 °C - 60 °C\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eNote: A heated bed is not a strict requirement when printing PLA+Silk, but using one is recommended.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eRecommended Build Surfaces\/Adhesives\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eGlass Build Surface\u003c\/li\u003e\n\u003cli\u003ePEI Build Surface\u003c\/li\u003e\n\u003cli\u003eMagigoo\u003c\/li\u003e\n\u003cli\u003ePainter's Tape\u003c\/li\u003e\n\u003cli\u003eGlue Stick\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eCooling Fan: Recommended. Up to 100% fan speed is advisable when printing PLA+Silk.\u003c\/li\u003e\n\u003cli\u003eDrying: PLA+Silk filament is hygroscopic and will absorb moisture from the air if not stored in a dry environment. If this happens, you may experience under-extrusion\/inconsistent extrusion or excess stringing. You may also hear a \"popping\" sound coming from the hotend during printing. We recommend drying our PLA at 55 °C for at least 3 hours if it has been exposed to excess humidity.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":46289627447509,"sku":"sku-41908633305271","price":30.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g","offer_id":46289916494037,"sku":"sku-41908633338039","price":21.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 1kg","offer_id":46289916821717,"sku":"sku-41914590724279","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0520\/1972\/4454\/files\/Electric-Blue-PLA_Silk-coex3d-87130732.webp?v=1711026467"},{"product_id":"flame-retardant-black-abs","title":"COEX 3D Flame Retardant Black ABS 3D Filament","description":"\u003ch1\u003eCOEX 3D Flame Retardant Black ABS 3D Filament\u003c\/h1\u003e\n\u003cp\u003eCoex 3D flame retardant ABS filament is made using a premium UL94 V-0 rated ABS resin. This filament is ideal for applications that require self-extinguishing properties. (UL yellow card information available upon request.)\u003c\/p\u003e\n\u003cp\u003eFlame Rating (UL94)*\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1.5mm: V-0\u003c\/li\u003e\n\u003cli\u003e2.0mm: V-0, 5VB\u003c\/li\u003e\n\u003cli\u003e2.5mm: V-0, 5VA\u003c\/li\u003e\n\u003cli\u003e3.0mm: V-0, 5VA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e*This is the UL94 rating of base resin used to make Coex Brand Flame Retardant ABS Filament.\u003c\/p\u003e\n\u003cp\u003eSafety Note: Direct ventilation from your printer is required to print with Flame Retardant ABS. Coex 3D highly recommends venting outside or via HEPA and carbon filtration.\u003c\/p\u003e\n\u003cp\u003eWarning! Never let Flame Retardant filament cool in your printer nozzle. Always remove the filament while nozzle is still hot and purge with standard ABS after printing.\u003c\/p\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":46289627709653,"sku":"sku-41279438028983","price":52.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g","offer_id":46289916199125,"sku":"sku-41279437963447","price":33.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 5lb","offer_id":46289916625109,"sku":"sku-41279437996215","price":115.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 1kg","offer_id":46289916952789,"sku":"sku-41279438061751","price":52.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 5lb","offer_id":51117479690453,"sku":"CX16-0300-30-5LB","price":115.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0520\/1972\/4454\/files\/Flame-Retardant-Black-ABS-coex3d-126138419.jpg?v=1711026467"},{"product_id":"glacier-blue-pla","title":"COEX 3D Glacier Blue PLA 3D Filament","description":"\u003ch1\u003eCOEX 3D Glacier Blue PLA 3D Filament\u003c\/h1\u003e\n\u003cp\u003eThe most environment-friendly 3D filament solution. Because of its low toxicity and ease of printing, PLA (Polylactic Acid) filament is a very popular choice in the 3D printing community. It looks great, is extremely easy to print with, and has generally good mechanical properties. It's perfect for prototypes and decorative models.\u003c\/p\u003e\n\u003cp\u003eCoex 3D Glacier Blue PLA is made with Virgin NatureWorks USA Ingeo resin and high-quality colorant only, with no fillers. All of Coex's filament is made in a production facility located in Wisconsin, USA. Coex 3D uses industrial-grade extruders and laser measuring quality control to ensure quality, consistency, and a 1.75±0.03mm diameter specification with every spool. Coex 3D provides filament that gives excellent-looking and strong prints.\u003c\/p\u003e\n\u003cp\u003eCoex 3D recommends the following print settings when printing with this PLA. Settings will vary depending on your specific printing setup.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHotend Temperature: 215 °C - 235 °C\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eImportant! This temperature range may seem hotter than you're used to for other PLA filaments. Using 100% virgin resin causes Coex 3D PLA to require slightly higher printing temperatures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eHeated Bed Temperature: 40 °C - 60 °C\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eNote: A heated bed is not a strict requirement when printing PLA, but using one is recommended.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eRecommended Build Surfaces\/Adhesives\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eGlass Build Surface\u003c\/li\u003e\n\u003cli\u003ePEI Build Surface\u003c\/li\u003e\n\u003cli\u003eMagigoo\u003c\/li\u003e\n\u003cli\u003ePainter's Tape\u003c\/li\u003e\n\u003cli\u003eGlue Stick\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eCooling Fan: Recommended. Up to 100% fan speed is advisable when printing PLA.\u003c\/li\u003e\n\u003cli\u003eDrying: PLA filament is hygroscopic and will absorb moisture from the air if not stored in a dry environment. If this happens, you may experience under-extrusion\/inconsistent extrusion or excess stringing. You may also hear a \"popping\" sound coming from the hotend during printing. Coex 3D recommends drying PLA at 55 °C for at least 3 hours if it has been exposed to excess humidity.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":46551462674645,"sku":"sku-41567366512823","price":24.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g","offer_id":46551463231701,"sku":"sku-41567366545591","price":19.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 1kg","offer_id":46289916526805,"sku":"sku-41567366873271","price":24.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0520\/1972\/4454\/files\/Glacier-Blue-PLA-COEX-3D-127362531.jpg?v=1711026467"},{"product_id":"gamer-green-chartreuse-pla","title":"COEX 3D Gamer Green (Chartreuse) PLA 3D Filament","description":"\u003ch1\u003eCOEX 3D Gamer Green (Chartreuse) PLA 3D Filament\u003c\/h1\u003e\n\u003cp\u003eThe most environment-friendly 3D filament solution. Because of its low toxicity and ease of printing, PLA (Polylactic Acid) filament is a very popular choice in the 3D printing community. It looks great, is extremely easy to print with, and has generally good mechanical properties. It's perfect for prototypes and decorative models.\u003c\/p\u003e\n\u003cp\u003eCoex 3D Gamer Green PLA is made with Virgin NatureWorks USA Ingeo resin and high-quality colorant only, with no fillers. All of Coex's filament is made in a production facility located in Wisconsin, USA. Coex 3D uses industrial-grade extruders and laser measuring quality control to ensure quality, consistency, and a 1.75±0.03mm diameter specification with every spool. Coex 3D provides filament that gives excellent-looking and strong prints.\u003c\/p\u003e\n\u003cp\u003eCoex 3D recommends the following print settings when printing with this PLA. Settings will vary depending on your specific printing setup.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHotend Temperature: 215 °C - 235 °C\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eImportant! This temperature range may seem hotter than you're used to for other PLA filaments. Using 100% virgin resin causes Coex 3D PLA to require slightly higher printing temperatures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eHeated Bed Temperature: 40 °C - 60 °C\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eNote: A heated bed is not a strict requirement when printing PLA, but using one is recommended.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eRecommended Build Surfaces\/Adhesives\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eGlass Build Surface\u003c\/li\u003e\n\u003cli\u003ePEI Build Surface\u003c\/li\u003e\n\u003cli\u003eMagigoo\u003c\/li\u003e\n\u003cli\u003ePainter's Tape\u003c\/li\u003e\n\u003cli\u003eGlue Stick\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eCooling Fan: Recommended. Up to 100% fan speed is advisable when printing PLA.\u003c\/li\u003e\n\u003cli\u003eDrying: PLA filament is hygroscopic and will absorb moisture from the air if not stored in a dry environment. If this happens, you may experience under-extrusion\/inconsistent extrusion or excess stringing. You may also hear a \"popping\" sound coming from the hotend during printing. Coex 3D recommends drying PLA at 55 °C for at least 3 hours if it has been exposed to excess humidity.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":46289628332245,"sku":"sku-41279438389431","price":24.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g","offer_id":46289915674837,"sku":"sku-41296748642487","price":19.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 5lb","offer_id":46289916559573,"sku":"sku-41279438356663","price":54.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 15lb","offer_id":46289916887253,"sku":"sku-41296744186039","price":162.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 1kg","offer_id":46289917640917,"sku":"sku-41279438422199","price":24.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 5lb","offer_id":46289917837525,"sku":"sku-41279438454967","price":54.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0520\/1972\/4454\/files\/Gamer-Green-_Chartreuse_-PLA-coex3d-87105950.jpg?v=1711026467"},{"product_id":"frost-white-pla-silk","title":"COEX 3D Frost White PLA+Silk 3D Filament","description":"\u003ch1\u003eCOEX 3D Frost White PLA+Silk 3D Filament\u003c\/h1\u003e\n\u003cp\u003eExperience a Superior 3D Printing Experience with Frost White PLA+Silk Filament\u003c\/p\u003e\n\u003cp\u003ePLA+Silk gives a glossy shine to anything you print with it. It looks great, is extremely easy to print with, and has generally good mechanical properties. It's perfect for showpieces and decorative models.\u003c\/p\u003e\n\u003cp\u003eCoex 3D PLA+Silk is made with Virgin NatureWorks USA Ingeo resin, a high-quality colorant, and our secretive additive. All of Coex's filament is made in a production facility located in Wisconsin, USA. Coex 3D uses industrial-grade extruders and laser measuring quality control to ensure quality, consistency, and a 1.75±0.03mm diameter specification with every spool. Coex 3D provides filament that gives excellent-looking and strong prints.\u003c\/p\u003e\n\u003cp\u003eCoex 3D recommends the following print settings when printing with this PLA. Settings will vary depending on your specific printing setup.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHotend Temperature: 215 °C - 235 °C\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eImportant! This temperature range may seem hotter than you're used to for other PLA+Silk filaments. Using 100% virgin resin causes Coex 3D PLA+Silk to require slightly higher printing temperatures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eHeated Bed Temperature: 40 °C - 60 °C\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eNote: A heated bed is not a strict requirement when printing PLA+Silk, but using one is recommended.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eRecommended Build Surfaces\/Adhesives\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eGlass Build Surface\u003c\/li\u003e\n\u003cli\u003ePEI Build Surface\u003c\/li\u003e\n\u003cli\u003eMagigoo\u003c\/li\u003e\n\u003cli\u003ePainter's Tape\u003c\/li\u003e\n\u003cli\u003eGlue Stick\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eCooling Fan: Recommended. Up to 100% fan speed is advisable when printing PLA+Silk.\u003c\/li\u003e\n\u003cli\u003eDrying: PLA+Silk filament is hygroscopic and will absorb moisture from the air if not stored in a dry environment. If this happens, you may experience under-extrusion\/inconsistent extrusion or excess stringing. You may also hear a \"popping\" sound coming from the hotend during printing. Coex 3D recommends drying this PLA at 55 °C for at least 3 hours if it has been exposed to excess humidity.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":46289628233941,"sku":"sku-41908608106679","price":30.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g","offer_id":46289915510997,"sku":"sku-41908608139447","price":21.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 9lb","offer_id":49418519183573,"sku":"CX03-0260-18-9LB","price":120.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 15lb","offer_id":49416993538261,"sku":"CX03-0260-18-15LB","price":200.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 22lb","offer_id":46289916756181,"sku":"sku-42211264823479","price":280.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 1kg","offer_id":46289915904213,"sku":"sku-41914591543479","price":30.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 15lb","offer_id":48545116750037,"sku":"CX03-0260-30-15LB","price":200.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0520\/1972\/4454\/files\/Frost-White-PLA_Silk-coex3d-87129534.webp?v=1711026467"},{"product_id":"green-bay-yellow-pla","title":"COEX 3D Green Bay Yellow PLA 3D Filament","description":"\u003ch1\u003eCOEX 3D Green Bay Yellow PLA 3D Filament\u003c\/h1\u003e\n\u003cp\u003eThe most environment-friendly 3D filament solution. Because of its low toxicity and ease of printing, PLA (Polylactic Acid) filament is a very popular choice in the 3D printing community. It looks great, is extremely easy to print with, and has generally good mechanical properties. It's perfect for prototypes and decorative models.\u003c\/p\u003e\n\u003cp\u003eCoex 3D Green Bay Yellow PLA is made with Virgin NatureWorks USA Ingeo resin and high-quality colorant only, with no fillers. All of Coex's filament is made in a production facility located in Wisconsin, USA. Coex 3D uses industrial-grade extruders and laser measuring quality control to ensure quality, consistency, and a 1.75±0.03mm diameter specification with every spool. Coex 3D provides filament that gives excellent-looking and strong prints.\u003c\/p\u003e\n\u003cp\u003eCoex 3D recommends the following print settings when printing with this PLA. Settings will vary depending on your specific printing setup.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHotend Temperature: 215 °C - 235 °C\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eImportant! This temperature range may seem hotter than you're used to for other PLA filaments. Using 100% virgin resin causes Coex 3D PLA to require slightly higher printing temperatures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eHeated Bed Temperature: 40 °C - 60 °C\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eNote: A heated bed is not a strict requirement when printing PLA, but using one is recommended.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eRecommended Build Surfaces\/Adhesives\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eGlass Build Surface\u003c\/li\u003e\n\u003cli\u003ePEI Build Surface\u003c\/li\u003e\n\u003cli\u003eMagigoo\u003c\/li\u003e\n\u003cli\u003ePainter's Tape\u003c\/li\u003e\n\u003cli\u003eGlue Stick\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eCooling Fan: Recommended. Up to 100% fan speed is advisable when printing PLA.\u003c\/li\u003e\n\u003cli\u003eDrying: PLA filament is hygroscopic and will absorb moisture from the air if not stored in a dry environment. If this happens, you may experience under-extrusion\/inconsistent extrusion or excess stringing. You may also hear a \"popping\" sound coming from the hotend during printing. Coex 3D recommends drying PLA at 55 °C for at least 3 hours if it has been exposed to excess humidity.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":46289628692693,"sku":"sku-41331681951927","price":24.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g","offer_id":46289915609301,"sku":"sku-41331681919159","price":19.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 5lb","offer_id":46289916461269,"sku":"sku-41331681984695","price":54.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 1kg","offer_id":46289916788949,"sku":"sku-41331682017463","price":24.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 5lb","offer_id":46289917575381,"sku":"sku-41331682050231","price":54.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0520\/1972\/4454\/files\/Green-Bay-Yellow-PLA-COEX-3D-87115559.jpg?v=1711026467"},{"product_id":"green-bay-yellow-pla-prime","title":"COEX 3D Green Bay Yellow PLA Prime 3D Filament","description":"\u003ch1\u003eCOEX 3D Green Bay Yellow PLA Prime 3D Filament\u003c\/h1\u003e\n\u003cp\u003ePolylactic Acid is a biodegradable, eco-friendly plastic, known for its ease of use and low warpage quality. PLA Prime is Coex 3D 's high performance PLA 3D printing filament. It is made from Natureworks Ingeo 3D850 and shows improved heat resistance, more toughness, good adhesion and less warping or curling than traditional PLA. PLA was always the go-to basic filament and is still recommended when you start your journey with 3D printing, without needing to change any of your profiles you can up your game by printing with Coex 3D PLA Prime - available in most of standard PLA colors.\u003c\/p\u003e\n\u003cp\u003eThis high performance material will be perfect for that special print or prototype that you've been wanting to make but weren't sure if PLA was the best material for the job. Please realize though that all grades of PLA will still have limitations. If you truly need high strength and high heat resistance you may want to explore other materials for your project or part.ion\/inconsistent extrusion or excess stringing. If the material has been opened and you hear a \"popping\" sound coming from the hotend during printing, Coex 3D recommends drying PLA at 55 °C for at least 3 hours if it has been exposed to excess humidity.\u003c\/p\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":46289628528853,"sku":"sku-41536050954423","price":32.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g","offer_id":50826010886357,"sku":"CX08-3700-18-500G","price":24.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0520\/1972\/4454\/files\/Green-Bay-Yellow-PLA-Prime-COEX-3D-87116427.jpg?v=1711026467"},{"product_id":"gunmetal-gray-petg","title":"COEX 3D Gunmetal Gray PETG 3D Filament","description":"\u003ch1\u003eCOEX 3D Gunmetal Gray PETG 3D Filament\u003c\/h1\u003e\n\u003cp\u003ePETG (PolyEthylene Terephthalate plus Glycol) is a co-polyester used in 3D printing for its durability, impact resistance, and temperature resistance. PETG is the second most popular 3D printing filament behind the ubiquitous PLA. It has qualities comparable to ABS but can be printed without an enclosure or fume handling requirements. Unlike ABS, however, PETG cannot be vapor smoothed using acetone.\u003c\/p\u003e\n\u003cp\u003eCoex 3D Gunmetal Gray PETG is made with Virgin resin and high-quality colorant only, with no fillers. All of Coex's filament is made in a production facility located in Wisconsin, USA. Coex 3D uses industrial-grade extruders and laser measuring quality control to ensure quality, consistency, and a 1.75±0.03mm diameter specification with every spool. Coex 3D provides filament that gives excellent-looking and strong prints.\u003c\/p\u003e\n\u003cp\u003eCoex 3D recommends the following settings when printing with this PETG. Settings will vary depending on your specific print setup.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHotend Temperature: 230 °C - 245 °C\u003c\/li\u003e\n\u003cli\u003eBed Temperature: 70 °C - 90 °C\u003c\/li\u003e\n\u003cli\u003eHeated Bed Recommended\u003c\/li\u003e\n\u003cli\u003eRecommended Build Surfaces\/Adhesives:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003ePEI Build Surface\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eGlass Build Surface\u003c\/li\u003e\n\u003cli\u003eMagigoo\u003c\/li\u003e\n\u003cli\u003eGlue Stick\u003c\/li\u003e\n\u003cli\u003ePainter's Tape\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eCooling Fan: Recommended. PETG works best with slightly less cooling than PLA. 50-75% fan speed is recommended.\u003c\/li\u003e\n\u003cli\u003eIMPORTANT NOTE! PETG can fuse to glass and PEI print surfaces, causing damage to the print bed when the part is removed. For that reason, Coex 3D recommends always using an additional adhesion agent (such as glue stick or Magigoo) which will help the finished part to release from the print bed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOther Printing Tips\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePETG is slightly more hygroscopic than PLA, so drying your filament can be necessary if it is exposed to humidity. Coex 3D recommends drying Coex 3D PETG at 65 °C for at least 3 hours. You can tell when your filament needs drying if you experience under-extrusion\/inconsistent extrusion, and\/or excess stringing. Hearing a \"popping\" sound during a print is another sign of filament that needs to be dried.\u003c\/li\u003e\n\u003cli\u003ePETG can often result in more stringing than would be expected with PLA or similar filaments. There are a few steps you can take to reduce stringing:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eReduce print temperature. Keep in mind that reducing print temperature will slightly decrease layer adhesion and part strength, but can help reduce stringing.\u003c\/li\u003e\n\u003cli\u003eIncrease retraction. Increasing retraction length can help reduce stringing, especially on Bowden-style extrusion configurations.\u003c\/li\u003e\n\u003cli\u003eEnable \"Wipe while Retracting\" in your slicer. Most slicers allow for this option, which will start a travel move just before\/during the filament retraction. This helps \"wipe off\" the nozzle as a travel move starts, reducing stringing.\u003c\/li\u003e\n\u003cli\u003eEnable \"Combing Mode\" (Cura) or \"Avoid Crossing Perimeters\" (PrusaSlicer\/SuperSlicer\/etc.). Rather than travel moves always going in a straight line, this will cause them to choose a path that avoids crossing over perimeters, effectively keeping the nozzle \"inside\" the print area wherever possible. This eliminates stringing right at the source but still cannot eliminate it all (such as between multiple parts).\u003c\/li\u003e\n\u003cli\u003eUnfortunately in many cases stringing is impossible to fully eliminate, so some post-processing of prints is often necessary.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":46289628889301,"sku":"sku-41276021899447","price":33.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g","offer_id":46289915543765,"sku":"sku-41296888266935","price":21.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 5lb","offer_id":46289916297429,"sku":"sku-41279438848183","price":71.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 9lb","offer_id":46289916690645,"sku":"sku-41279438815415","price":127.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 15lb","offer_id":46289916985557,"sku":"sku-41296885186743","price":206.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 1kg","offer_id":46289917739221,"sku":"sku-41279438880951","price":33.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 5lb","offer_id":46289917935829,"sku":"sku-41279438913719","price":71.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 15lb","offer_id":46289918689493,"sku":"sku-41296891281591","price":206.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0520\/1972\/4454\/files\/Gunmetal-Grey-PETG-COEX-3D-127360349.jpg?v=1711026468"},{"product_id":"green-bay-green-pla","title":"COEX 3D Green Bay Green PLA 3D Filament","description":"\u003ch1\u003eCOEX 3D Green Bay Green PLA 3D Filament\u003c\/h1\u003e\n\u003cp\u003eThe most environment-friendly 3D filament solution. Because of its low toxicity and ease of printing, PLA (Polylactic Acid) filament is a very popular choice in the 3D printing community. It looks great, is extremely easy to print with, and has generally good mechanical properties. It's perfect for prototypes and decorative models.\u003c\/p\u003e\n\u003cp\u003eCoex 3D Green Bay Green PLA is made with Virgin NatureWorks USA Ingeo resin and high-quality colorant only, with no fillers. All of Coex's filament is made in a production facility located in Wisconsin, USA. Coex 3D uses industrial-grade extruders and laser measuring quality control to ensure quality, consistency, and a 1.75±0.03mm diameter specification with every spool. Coex 3D provides filament that gives excellent-looking and strong prints.\u003c\/p\u003e\n\u003cp\u003eCoex 3D recommends the following print settings when printing with this PLA. Settings will vary depending on your specific printing setup.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHotend Temperature: 215 °C - 235 °C\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eImportant! This temperature range may seem hotter than you're used to for other PLA filaments. Using 100% virgin resin causes \u003cspan data-mce-fragment=\"1\"\u003eCoex 3D\u003c\/span\u003e PLA to require slightly higher printing temperatures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eHeated Bed Temperature: 40 °C - 60 °C\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eNote: A heated bed is not a strict requirement when printing PLA, but using one is recommended.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eRecommended Build Surfaces\/Adhesives\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eGlass Build Surface\u003c\/li\u003e\n\u003cli\u003ePEI Build Surface\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/coex3d.com\/products\/magigoo-original-50ml\" title=\"Coex 3D Magigoo Original 50mL Shop Page\" rel=\"noopener\" target=\"_blank\"\u003eMagigoo\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003ePainter's Tape\u003c\/li\u003e\n\u003cli\u003eGlue Stick\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eCooling Fan: Recommended. Up to 100% fan speed is advisable when printing PLA.\u003c\/li\u003e\n\u003cli\u003eDrying: PLA filament is hygroscopic and will absorb moisture from the air if not stored in a dry environment. If this happens, you may experience under-extrusion\/inconsistent extrusion or excess stringing. You may also hear a \"popping\" sound coming from the hotend during printing. We recommend drying our PLA at 55 °C for at least 3 hours if it has been exposed to excess humidity.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":46289628856533,"sku":"sku-41279438684343","price":24.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g","offer_id":46289914757333,"sku":"sku-41279438717111","price":19.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 5lb","offer_id":46289915379925,"sku":"sku-41279438651575","price":54.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 1kg","offer_id":46289915576533,"sku":"sku-41279438749879","price":24.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 5lb","offer_id":46289916362965,"sku":"sku-41279438782647","price":54.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 15lb","offer_id":46289916657877,"sku":"sku-41296880926903","price":162.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 8lb","offer_id":53834357866709,"sku":"CX02-4800-18-8LB","price":86.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0520\/1972\/4454\/files\/Green-Bay-Green-PLA-COEX-3D-87106545.jpg?v=1711026467"},{"product_id":"inferno-orange-abs","title":"COEX 3D Inferno Orange ABS 3D Filament","description":"\u003ch1\u003eCOEX 3D Inferno Orange ABS 3D Filament\u003c\/h1\u003e\n\u003cp\u003eABS filament is an advanced thermoplastic 3d printing filament ABS, which stands for Acrylonitrile Butadiene Styrene. It easily molds when heated and sets evenly when cooled. ABS filament is used by a variety of manufacturing industries for parts requiring structural integrity and detail, and is ideal for “wear and tear” projects. It is commonly used in rapid prototyping and additive manufacturing environments to test product impact resistance and durability. It is also popular with 3D printing hobbyist who utilize 3D printing in their home or at a local maker faire. This 3D printer filament comes in a variety of colors and is available in 1.75 and 2.85 MM in diameter, and comes in 500 g, 5 lbs, 15 lbs and 1 kg.\u003c\/p\u003e\n\u003cp\u003eAs opposed to PLA and PETG filament, ABS is a bit more technical and may be more challenging for new 3D printing users and requires the use of an enclosed 3D printer. ABS is a stiff 3D printing material and it is impact and heat resistant. Common applications for ABS include end-use tools, moving parts, and parts that have to withstand high mechanical stress.\u003c\/p\u003e\n","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":46289629053141,"sku":"sku-41279439143095","price":30.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g","offer_id":46289914822869,"sku":"sku-41279439175863","price":22.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 5lb","offer_id":46289915478229,"sku":"sku-41279439110327","price":68.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 15lb","offer_id":46289916395733,"sku":"sku-41296998629559","price":203.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0520\/1972\/4454\/files\/Inferno-Orange-ABS-COEX-3D-87106913.jpg?v=1711026466"},{"product_id":"iced-amethyst-pla","title":"COEX 3D Iced Amethyst PLA 3D Filament","description":"\u003ch1\u003eCOEX 3D Iced Amethyst PLA 3D Filament\u003c\/h1\u003e\n\u003cp\u003eThe most environment-friendly 3D filament solution. Because of its low toxicity and ease of printing, PLA (Polylactic Acid) filament is a very popular choice in the 3D printing community. It looks great, is extremely easy to print with, and has generally good mechanical properties. It's perfect for prototypes and decorative models.\u003c\/p\u003e\n\u003cp\u003eCoex 3D Iced Amethyst PLA is made with Virgin NatureWorks USA Ingeo resin and high-quality colorant only, with no fillers. All of Coex's filament is made in a production facility located in Wisconsin, USA. Coex 3D uses industrial-grade extruders and laser measuring quality control to ensure quality, consistency, and a 1.75±0.03mm diameter specification with every spool. Coex 3D provides filament that gives excellent-looking and strong prints.\u003c\/p\u003e\n\u003cp\u003eCoex 3D recommends the following print settings when printing with this PLA. Settings will vary depending on your specific printing setup.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHotend Temperature: 215 °C - 235 °C\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eImportant! This temperature range may seem hotter than you're used to for other PLA filaments. Using 100% virgin resin causes \u003cspan data-mce-fragment=\"1\"\u003eCoex 3D\u003c\/span\u003e PLA to require slightly higher printing temperatures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eHeated Bed Temperature: 40 °C - 60 °C\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eNote: A heated bed is not a strict requirement when printing PLA, but using one is recommended.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eRecommended Build Surfaces\/Adhesives\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eGlass Build Surface\u003c\/li\u003e\n\u003cli\u003ePEI Build Surface\u003c\/li\u003e\n\u003cli\u003eMagigoo\u003c\/li\u003e\n\u003cli\u003ePainter's Tape\u003c\/li\u003e\n\u003cli\u003eGlue Stick\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eCooling Fan: Recommended. Up to 100% fan speed is advisable when printing PLA.\u003c\/li\u003e\n\u003cli\u003eDrying: PLA filament is hygroscopic and will absorb moisture from the air if not stored in a dry environment. If this happens, you may experience under-extrusion\/inconsistent extrusion or excess stringing. You may also hear a \"popping\" sound coming from the hotend during printing. Coex 3D recommends drying PLA at 55 °C for at least 3 hours if it has been exposed to excess humidity.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":46289629708501,"sku":"sku-41279438979255","price":24.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g","offer_id":46289914790101,"sku":"sku-41279439012023","price":19.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 5lb","offer_id":46289915412693,"sku":"sku-41279438946487","price":54.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 1kg","offer_id":46289915642069,"sku":"sku-41279439044791","price":24.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 5lb","offer_id":46289916428501,"sku":"sku-41279439077559","price":54.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0520\/1972\/4454\/files\/Iced-Amethyst-PLA-COEX-3D-118101450.jpg?v=1711026468"},{"product_id":"cobalt-blue-asa-prime","title":"COEX 3D Cobalt Blue ASA Prime 3D Filament","description":"\u003ch1\u003eCOEX 3D Cobalt Blue ASA Prime 3D Filament\u003c\/h1\u003e\n\u003cp\u003eExperience Durability with Cobalt Blue ASA Prime\u003c\/p\u003e\n\u003cp\u003eASA filament (acrylonitrile styrene acrylate) is a thermoplastic 3D printing material that is perfect in many ways and is suitable for many different applications. It has a similar chemical makeup to ABS plastic but offers three notable improvements: better mechanical properties, it is naturally UV resistant, and it simply produces amazing finished prints. Coex 3D offers ASA in the same colors as ABS giving you 11 colors to choose from and is available in both 1.75mm and 2.85mm diameters in varying spool sizes.\u003c\/p\u003e\n\u003cp\u003eAlthough ASA can safely be printed using an open bed printer, it is still recommended to print ASA in an enclosed printer which will allow parts to cool slowly and uniformly which helps to prevent shrinkage and warping.\u003c\/p\u003e\n\u003cp\u003eCoex 3D’s ASA products are made with 100% virgin resin and high-quality colorants with no added fillers. All Coex 3D filament is made in a production facility in Green Bay, WI, USA using industrial-grade extruders and laser measuring quality control to ensure quality and consistency with every spool.\u003c\/p\u003e\n\u003cp\u003eLooking for a high-performance 3D printing polymer that provides excellent UV stability and weather resistance? Look no further than Cobalt Blue ASA Prime, the perfect choice for your 3D printing needs.\u003c\/p\u003e\n\u003cp\u003eCoex 3D’s Cobalt Blue ASA Prime is an Acrylonitrile Styrene Acrylate (ASA) polymer that is specifically formulated for 3D printing. It offers the ideal balance of mechanical strength, toughness, stiffness, and weather resistance that you can rely on for extended periods.\u003c\/p\u003e\n\u003cp\u003eCobalt Blue ASA Prime is well-suited for outdoor and automotive applications thanks to its exceptional weather resistance and UV stability. Coex 3D’s ASA polymer is perfect for creating functional prototypes, end-use parts, and low-volume production runs.\u003c\/p\u003e\n\u003cp\u003eIf you are looking for a material that can withstand harsh weather conditions, retain its color and mechanical properties in direct sunlight, and provide long-lasting performance, then Cobalt Blue ASA Prime is the right choice for you. With its easy-to-print characteristics and excellent layer adhesion, this ASA filament offers great value for money.\u003c\/p\u003e\n\u003cp\u003eGet your hands on Cobalt Blue ASA Prime today and experience the optimal balance of rigidity, toughness, UV resistance, and weather ability. Buy now and start creating durable, high-quality 3D prints that will last for years to come!\u003c\/p\u003e\n\u003cp\u003eCoex 3D recommends the following print settings when printing with this ASA. Settings will vary depending on your specific printing setup.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHotend Temperature: 235 °C - 245 °C\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eImportant! This temperature range may seem hotter than you're used to for other ASA filaments. Using 100% virgin resin causes Coex 3D’s ASA to require slightly higher printing temperatures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeated Bed Temperature: 80 °C - 1000 °C\u003c\/li\u003e\n\u003cli\u003eRecommended Build Surfaces\/Adhesives\n\u003cul\u003e\n\u003cli\u003eGlass Build Surface\u003c\/li\u003e\n\u003cli\u003ePEI Build Surface\u003c\/li\u003e\n\u003cli\u003eMagigoo\u003c\/li\u003e\n\u003cli\u003ePainter's Tape\u003c\/li\u003e\n\u003cli\u003eGlue Stick\u003c\/li\u003e\n\u003cli\u003eABS slurry\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eCooling Fan: Recommended.\u003c\/li\u003e\n\u003cli\u003eEnclosure: Recomended to prevent warping\u003c\/li\u003e\n\u003cli\u003eDrying: ASA filament is hygroscopic and will absorb moisture from the air if not stored in a dry environment. If this happens, you may experience under-extrusion\/inconsistent extrusion or excess stringing. You may also hear a \"popping\" sound coming from the hotend during printing. Coex 3D recommends drying ASA at 65 °C for at least 3 hours if it has been exposed to excess humidity.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":46289629970645,"sku":"sku-41868059214007","price":34.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g","offer_id":46289914724565,"sku":"sku-41868059181239","price":21.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 1kg","offer_id":46289915445461,"sku":"sku-41868059246775","price":34.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 5lb","offer_id":46289915740373,"sku":"sku-41930176626871","price":75.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 5lb","offer_id":46289916723413,"sku":"sku-41930176659639","price":75.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0520\/1972\/4454\/files\/Cobalt-Blue-ASA-Prime-COEX-3D-87127487.jpg?v=1711026468"},{"product_id":"gunmetal-gray-pla","title":"COEX 3D Gunmetal Gray PLA 3D Filament","description":"\u003ch1\u003eCOEX 3D Gunmetal Gray PLA 3D Filament\u003c\/h1\u003e\n\u003cp\u003eThe most environment-friendly 3D filament solution. Because of its low toxicity and ease of printing, PLA (Polylactic Acid) filament is a very popular choice in the 3D printing community. It looks great, is extremely easy to print with, and has generally good mechanical properties. It's perfect for prototypes and decorative models.\u003c\/p\u003e\n\u003cp\u003eCoex 3D Fog Gray PLA is made with Virgin NatureWorks USA Ingeo resin and high-quality colorant only, with no fillers. All of Coex's filament is made in a production facility located in Wisconsin, USA. Coex 3D uses industrial-grade extruders and laser measuring quality control to ensure quality, consistency, and a 1.75±0.03mm diameter specification with every spool. Coex 3D provides filament that gives excellent-looking and strong prints.\u003c\/p\u003e\n\u003cp\u003eCoex 3D recommends the following print settings when printing with this PLA. Settings will vary depending on your specific printing setup.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHotend Temperature: 215 °C - 235 °C\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eImportant! This temperature range may seem hotter than you're used to for other PLA filaments. Using 100% virgin resin causes Coex 3D PLA to require slightly higher printing temperatures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eHeated Bed Temperature: 40 °C - 60 °C\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eNote: A heated bed is not a strict requirement when printing PLA, but using one is recommended.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eRecommended Build Surfaces\/Adhesives\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eGlass Build Surface\u003c\/li\u003e\n\u003cli\u003ePEI Build Surface\u003c\/li\u003e\n\u003cli\u003eMagigoo\u003c\/li\u003e\n\u003cli\u003ePainter's Tape\u003c\/li\u003e\n\u003cli\u003eGlue Stick\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eCooling Fan: Recommended. Up to 100% fan speed is advisable when printing PLA.\u003c\/li\u003e\n\u003cli\u003eDrying: PLA filament is hygroscopic and will absorb moisture from the air if not stored in a dry environment. If this happens, you may experience under-extrusion\/inconsistent extrusion or excess stringing. You may also hear a \"popping\" sound coming from the hotend during printing. Coex 3D recommends drying PLA at 55 °C for at least 3 hours if it has been exposed to excess humidity.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":46289629741269,"sku":"sku-42168030527671","price":24.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g","offer_id":46289911644373,"sku":"sku-42168030560439","price":19.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 5lb","offer_id":46289912037589,"sku":"sku-42168030593207","price":54.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 1kg","offer_id":46289912070357,"sku":"sku-42168030625975","price":24.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 5lb","offer_id":46289912299733,"sku":"sku-42168030658743","price":54.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0520\/1972\/4454\/files\/Gunmetal-Gray-PLA-coex3d-173080121.jpg?v=1711026467"},{"product_id":"lemon-yellow-abs","title":"COEX 3D Lemon Yellow ABS 3D Filament","description":"\u003ch1\u003eCOEX 3D Lemon Yellow ABS 3D Filament\u003c\/h1\u003e\n\u003cp\u003eABS filament is a thermoplastic 3d printer filament ABS, which stands for Acrylonitrile Butadiene Styrene. It easily molds when heated and sets evenly when cooled. ABS filament is used by a variety of manufacturing industries for parts requiring structural integrity and detail, and is ideal for “wear and tear” projects. It is commonly used in rapid prototyping and additive manufacturing environments to test product impact resistance and durability. It is also popular with 3D printing hobbyist who utilize 3D printing in their home or at a local maker faire. This 3D printer filament comes in a variety of colors and is available in 1.75 and 2.85 MM in diameter, and comes in 500 g, 5 lbs, 15 lbs and 1 kg.\u003c\/p\u003e\n\u003cp\u003eAs opposed to PLA and PETG filament, ABS is a bit more technical and may be more challenging for new 3D printing users and requires the use of an enclosed 3D printer. ABS is a stiff 3D printing material and it is impact and heat resistant. Common applications for ABS include end-use tools, moving parts, and parts that have to withstand high mechanical stress.\u003c\/p\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":46289629806805,"sku":"sku-41279439569079","price":30.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g","offer_id":46289911349461,"sku":"sku-41279439601847","price":22.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 5lb","offer_id":46289911414997,"sku":"sku-41279439634615","price":68.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 1kg","offer_id":46289912004821,"sku":"sku-41656573919415","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0520\/1972\/4454\/files\/Lemon-Yellow-ABS-COEX-3D-87107492.jpg?v=1711026467"},{"product_id":"inferno-orange-pla","title":"COEX 3D Inferno Orange PLA 3D Filament","description":"\u003ch1\u003eCOEX 3D Inferno Orange PLA 3D Filament\u003c\/h1\u003e\n\u003cp\u003eThe most environment-friendly 3D filament solution. Because of its low toxicity and ease of printing, PLA (Polylactic Acid) filament is a very popular choice in the 3D printing community. It looks great, is extremely easy to print with, and has generally good mechanical properties. It's perfect for prototypes and decorative models.\u003c\/p\u003e\n\u003cp\u003eCoex 3D Inferno Orange PLA is made with Virgin NatureWorks USA Ingeo resin and high-quality colorant only, with no fillers. All of Coex's filament is made in a production facility located in Wisconsin, USA. Coex 3D uses industrial-grade extruders and laser measuring quality control to ensure quality, consistency, and a 1.75±0.03mm diameter specification with every spool. Coex 3D provides filament that gives excellent-looking and strong prints.\u003c\/p\u003e\n\u003cp\u003eCoex 3D recommends the following print settings when printing with this PLA. Settings will vary depending on your specific printing setup.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHotend Temperature: 215 °C - 235 °C\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eImportant! This temperature range may seem hotter than you're used to for other PLA filaments. Using 100% virgin resin causes Coex 3D PLA to require slightly higher printing temperatures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eHeated Bed Temperature: 40 °C - 60 °C\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eNote: A heated bed is not a strict requirement when printing PLA, but using one is recommended.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eRecommended Build Surfaces\/Adhesives\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eGlass Build Surface\u003c\/li\u003e\n\u003cli\u003ePEI Build Surface\u003c\/li\u003e\n\u003cli\u003eMagigoo\u003c\/li\u003e\n\u003cli\u003ePainter's Tape\u003c\/li\u003e\n\u003cli\u003eGlue Stick\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eCooling Fan: Recommended. Up to 100% fan speed is advisable when printing PLA.\u003c\/li\u003e\n\u003cli\u003eDrying: PLA filament is hygroscopic and will absorb moisture from the air if not stored in a dry environment. If this happens, you may experience under-extrusion\/inconsistent extrusion or excess stringing. You may also hear a \"popping\" sound coming from the hotend during printing. Coex 3D recommends drying PLA at 55 °C for at least 3 hours if it has been exposed to excess humidity.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":46289630134485,"sku":"sku-41279439241399","price":24.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g","offer_id":46289910759637,"sku":"sku-41279439274167","price":19.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 5lb","offer_id":46289911283925,"sku":"sku-41279439306935","price":54.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 1kg","offer_id":46289911382229,"sku":"sku-41279439339703","price":24.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 5lb","offer_id":46289911447765,"sku":"sku-41279439372471","price":54.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0520\/1972\/4454\/files\/Inferno-Orange-PLA-COEX-3D-87107080.jpg?v=1711026467"},{"product_id":"inferno-orange-asa-prime","title":"COEX 3D Inferno Orange ASA Prime 3D Filament","description":"\u003ch1\u003eCOEX 3D Inferno Orange ASA Prime 3D Filament\u003c\/h1\u003e\n\u003cp\u003eExperience Durability with Inferno Orange ASA Prime\u003c\/p\u003e\n\u003cp\u003eASA filament (acrylonitrile styrene acrylate) is a thermoplastic 3D printing material that is perfect in many ways and is suitable for many different applications. It has a similar chemical makeup to ABS plastic but offers three notable improvements: better mechanical properties, it is naturally UV resistant, and it simply produces amazing finished prints. Coex 3D offers ASA in the same colors as ABS giving you 11 colors to choose from and is available in both 1.75mm and 2.85mm diameters in varying spool sizes.\u003c\/p\u003e\n\u003cp\u003eAlthough ASA can safely be printed using an open bed printer, it is still recommended to print ASA in an enclosed printer which will allow parts to cool slowly and uniformly which helps to prevent shrinkage and warping.\u003c\/p\u003e\n\u003cp\u003eCoex 3D’s ASA products are made with 100% virgin resin and high-quality colorants with no added fillers. All Coex 3D filament is made in a production facility in Green Bay, WI, USA using industrial-grade extruders and laser measuring quality control to ensure quality and consistency with every spool.\u003c\/p\u003e\n\u003cp\u003eLooking for a high-performance 3D printing polymer that provides excellent UV stability and weather resistance? Look no further than Inferno Orange ASA Prime, the perfect choice for your 3D printing needs.\u003c\/p\u003e\n\u003cp\u003eCoex 3D’s Inferno Orange ASA Prime is an Acrylonitrile Styrene Acrylate (ASA) polymer that is specifically formulated for 3D printing. It offers the ideal balance of mechanical strength, toughness, stiffness, and weather resistance that you can rely on for extended periods.\u003c\/p\u003e\n\u003cp\u003eInferno Orange ASA Prime is well-suited for outdoor and automotive applications thanks to its exceptional weather resistance and UV stability. Coex 3D’s ASA polymer is perfect for creating functional prototypes, end-use parts, and low-volume production runs.\u003c\/p\u003e\n\u003cp\u003eIf you are looking for a material that can withstand harsh weather conditions, retain its color and mechanical properties in direct sunlight, and provide long-lasting performance, then Inferno Orange ASA Prime is the right choice for you. With its easy-to-print characteristics and excellent layer adhesion, this ASA filament offers great value for money.\u003c\/p\u003e\n\u003cp\u003eGet your hands on Inferno Orange ASA Prime today and experience the optimal balance of rigidity, toughness, UV resistance, and weather ability. Buy now and start creating durable, high-quality 3D prints that will last for years to come!\u003c\/p\u003e\n\u003cp\u003eCoex 3D recommends the following print settings when printing with this ASA. Settings will vary depending on your specific printing setup.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHotend Temperature: 235 °C - 245 °C\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eImportant! This temperature range may seem hotter than you're used to for other ASA filaments. Using 100% virgin resin causes Coex 3D ASA to require slightly higher printing temperatures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeated Bed Temperature: 80 °C - 1000 °C\u003c\/li\u003e\n\u003cli\u003eRecommended Build Surfaces\/Adhesives\n\u003cul\u003e\n\u003cli\u003eGlass Build Surface\u003c\/li\u003e\n\u003cli\u003ePEI Build Surface\u003c\/li\u003e\n\u003cli\u003eMagigoo\u003c\/li\u003e\n\u003cli\u003ePainter's Tape\u003c\/li\u003e\n\u003cli\u003eGlue Stick\u003c\/li\u003e\n\u003cli\u003eABS slurry\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eCooling Fan: Recommended.\u003c\/li\u003e\n\u003cli\u003eEnclosure: Recomended to prevent warping\u003c\/li\u003e\n\u003cli\u003eDrying: ASA filament is hygroscopic and will absorb moisture from the air if not stored in a dry environment. If this happens, you may experience under-extrusion\/inconsistent extrusion or excess stringing. You may also hear a \"popping\" sound coming from the hotend during printing. Coex 3D recommends drying ASA at 65 °C for at least 3 hours if it has been exposed to excess humidity.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":46289630560469,"sku":"sku-41868052955319","price":34.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g","offer_id":46289910038741,"sku":"sku-41868052922551","price":21.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 1kg","offer_id":46289910661333,"sku":"sku-41868052988087","price":34.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 5lb","offer_id":46289910726869,"sku":"sku-41988498129079","price":75.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0520\/1972\/4454\/files\/Inferno-ASA-Prime-COEX-3D-87126589.jpg?v=1711026468"},{"product_id":"lemon-yellow-asa-prime","title":"COEX 3D Lemon Yellow ASA Prime 3D Filament","description":"\u003ch1\u003eCOEX 3D Lemon Yellow ASA Prime 3D Filament\u003c\/h1\u003e\n\u003cp\u003eExperience Durability with Lemon Yellow ASA Prime\u003c\/p\u003e\n\u003cp\u003eASA filament (acrylonitrile styrene acrylate) is a thermoplastic 3D printing material that is perfect in many ways and is suitable for many different applications. It has a similar chemical makeup to ABS plastic but offers three notable improvements: better mechanical properties, it is naturally UV resistant, and it simply produces amazing finished prints. Coex 3D offers ASA in the same colors as ABS giving you 11 colors to choose from and is available in both 1.75mm and 2.85mm diameters in varying spool sizes.\u003c\/p\u003e\n\u003cp\u003eAlthough ASA can safely be printed using an open bed printer, it is still recommended to print ASA in an enclosed printer which will allow parts to cool slowly and uniformly which helps to prevent shrinkage and warping.\u003c\/p\u003e\n\u003cp\u003eCoex 3D’s ASA products are made with 100% virgin resin and high-quality colorants with no added fillers. All Coex 3D filament is made in a production facility in Green Bay, WI, USA using industrial-grade extruders and laser measuring quality control to ensure quality and consistency with every spool.\u003c\/p\u003e\n\u003cp\u003eLooking for a high-performance 3D printing polymer that provides excellent UV stability and weather resistance? Look no further than Lemon Yellow ASA Prime, the perfect choice for your 3D printing needs.\u003c\/p\u003e\n\u003cp\u003eCoex 3D’s Lemon Yellow ASA Prime is an Acrylonitrile Styrene Acrylate (ASA) polymer that is specifically formulated for 3D printing. It offers the ideal balance of mechanical strength, toughness, stiffness, and weather resistance that you can rely on for extended periods.\u003c\/p\u003e\n\u003cp\u003eLemon Yellow ASA Prime is well-suited for outdoor and automotive applications thanks to its exceptional weather resistance and UV stability. Our ASA polymer is perfect for creating functional prototypes, end-use parts, and low-volume production runs.\u003c\/p\u003e\n\u003cp\u003eIf you are looking for a material that can withstand harsh weather conditions, retain its color and mechanical properties in direct sunlight, and provide long-lasting performance, then Lemon Yellow ASA Prime is the right choice for you. With its easy-to-print characteristics and excellent layer adhesion, this ASA filament offers great value for money.\u003c\/p\u003e\n\u003cp\u003eCoex 3D recommends the following print settings when printing with this ASA. Settings will vary depending on your specific printing setup.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHotend Temperature: 235 °C - 245 °C\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eImportant! This temperature range may seem hotter than you're used to for other ASA filaments. Using 100% virgin resin causes Coex 3D ASA to require slightly higher printing temperatures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeated Bed Temperature: 80 °C - 1000 °C\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRecommended Build Surfaces\/Adhesives\n\u003cul\u003e\n\u003cli\u003eGlass Build Surface\u003c\/li\u003e\n\u003cli\u003ePEI Build Surface\u003c\/li\u003e\n\u003cli\u003eMagigoo\u003c\/li\u003e\n\u003cli\u003ePainter's Tape\u003c\/li\u003e\n\u003cli\u003eGlue Stick\u003c\/li\u003e\n\u003cli\u003eABS slurry\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eCooling Fan: Recommended.\u003c\/li\u003e\n\u003cli\u003eEnclosure: Recommended to prevent warping\u003c\/li\u003e\n\u003cli\u003eDrying: ASA filament is hygroscopic and will absorb moisture from the air if not stored in a dry environment. If this happens, you may experience under-extrusion\/inconsistent extrusion or excess stringing. You may also hear a \"popping\" sound coming from the hotend during printing. Coex 3D recommends drying ASA at 65 °C for at least 3 hours if it has been exposed to excess humidity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGet your hands on Lemon Yellow ASA Prime today and experience the optimal balance of rigidity, toughness, UV resistance, and weather ability. Buy now and start creating durable, high-quality 3D prints that will last for years to come!\u003c\/p\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":46289644191957,"sku":"sku-41868058755255","price":34.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g","offer_id":46551792353493,"sku":"sku-41868058722487","price":21.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 1kg","offer_id":46551792713941,"sku":"sku-41868058788023","price":34.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 5lb","offer_id":46551793270997,"sku":"sku-42018021310647","price":75.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 5lb","offer_id":46551793402069,"sku":"sku-42018026520759","price":75.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0520\/1972\/4454\/files\/Lemon-Yellow-ASA-Prime-COEX-3D-87127174.jpg?v=1711026492"},{"product_id":"pumpkin-orange-petg","title":"COEX 3D Pumpkin Orange PETG 3D Filament","description":"\u003ch1\u003eCOEX 3D Pumpkin Orange PETG 3D Filament\u003c\/h1\u003e\n\u003cp\u003ePETG (PolyEthylene Terephthalate plus Glycol) is a co-polyester used in 3D printing for its durability, impact resistance, and temperature resistance. PETG is the second most popular 3D printing filament behind the ubiquitous PLA. It has qualities comparable to ABS but can be printed without an enclosure or fume handling requirements. Unlike ABS, however, PETG cannot be vapor smoothed using acetone.\u003c\/p\u003e\n\u003cp\u003eCoex 3D Pumpkin Orange PETG is made with Virgin resin and high-quality colorant only, with no fillers. All of Coex's filament is made in a production facility located in Wisconsin, USA. Coex 3D uses industrial-grade extruders and laser measuring quality control to ensure quality, consistency, and a 1.75±0.03mm diameter specification with every spool. Coex 3D provides filament that gives excellent-looking and strong prints.\u003c\/p\u003e\n\u003cp\u003eCoex 3D recommends the following settings when printing with this PETG. Settings will vary depending on your specific print setup.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHotend Temperature: 230 °C - 245 °C\u003c\/li\u003e\n\u003cli\u003eBed Temperature: 70 °C - 90 °C\u003c\/li\u003e\n\u003cli\u003eHeated Bed Recommended\u003c\/li\u003e\n\u003cli\u003eRecommended Build Surfaces\/Adhesives:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003ePEI Build Surface\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eGlass Build Surface\u003c\/li\u003e\n\u003cli\u003eMagigoo\u003c\/li\u003e\n\u003cli\u003eGlue Stick\u003c\/li\u003e\n\u003cli\u003ePainter's Tape\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eCooling Fan: Recommended. PETG works best with slightly less cooling than PLA. 50-75% fan speed is recommended.\u003c\/li\u003e\n\u003cli\u003eIMPORTANT NOTE! PETG can fuse to glass and PEI print surfaces, causing damage to the print bed when the part is removed. For that reason, Coex 3D recommends always using an additional adhesion agent (such as glue stick or Magigoo) which will help the finished part to release from the print bed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOther Printing Tips\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003ePETG is slightly more hygroscopic than PLA, so drying your filament can be necessary if it is exposed to humidity. Coex 3D recommends drying PETG at 65 °C for at least 3 hours. You can tell when your filament needs drying if you experience under-extrusion\/inconsistent extrusion, and\/or excess stringing. Hearing a \"popping\" sound during a print is another sign of filament that needs to be dried.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003ePETG can often result in more stringing than would be expected with PLA or similar filaments. There are a few steps you can take to reduce stringing:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eReduce print temperature. Keep in mind that reducing print temperature will slightly decrease layer adhesion and part strength, but can help reduce stringing.\u003c\/li\u003e\n\u003cli\u003eIncrease retraction. Increasing retraction length can help reduce stringing, especially on Bowden-style extrusion configurations.\u003c\/li\u003e\n\u003cli\u003eEnable \"Wipe while Retracting\" in your slicer. Most slicers allow for this option, which will start a travel move just before\/during the filament retraction. This helps \"wipe off\" the nozzle as a travel move starts, reducing stringing.\u003c\/li\u003e\n\u003cli\u003eEnable \"Combing Mode\" (Cura) or \"Avoid Crossing Perimeters\" (PrusaSlicer\/SuperSlicer\/etc.). Rather than travel moves always going in a straight line, this will cause them to choose a path that avoids crossing over perimeters, effectively keeping the nozzle \"inside\" the print area wherever possible. This eliminates stringing right at the source but still cannot eliminate it all (such as between multiple parts).\u003c\/li\u003e\n\u003cli\u003eUnfortunately in many cases stringing is impossible to fully eliminate, so some post-processing of prints is often necessary.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":46289644224725,"sku":"sku-41703931740343","price":33.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g","offer_id":46289909317845,"sku":"sku-41703931773111","price":21.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 5lb","offer_id":46289909874901,"sku":"sku-41703931805879","price":71.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 1kg","offer_id":46289909973205,"sku":"sku-41703931838647","price":33.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 5lb","offer_id":46289910071509,"sku":"sku-41703931871415","price":71.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0520\/1972\/4454\/files\/Pumpkin-Orange-PETG-coex3d-87121612.jpg?v=1711026492"},{"product_id":"pumpkin-orange-pla","title":"COEX 3D Pumpkin Orange PLA 3D Filament","description":"\u003ch2\u003eCOEX 3D Pumpkin Orange PLA 3D Filament\u003c\/h2\u003e\n\u003cp\u003eThe most environment-friendly 3D filament solution. Because of its low toxicity and ease of printing, PLA (Polylactic Acid) filament is a very popular choice in the 3D printing community. It looks great, is extremely easy to print with, and has generally good mechanical properties. It's perfect for prototypes and decorative models.\u003c\/p\u003e\n\u003cp\u003eCoex 3D Pumpkin Orange PLA is made with Virgin NatureWorks USA Ingeo resin and high-quality colorant only, with no fillers. All of Coex's filament is made in a production facility located in Wisconsin, USA. Coex 3D uses industrial-grade extruders and laser measuring quality control to ensure quality, consistency, and a 1.75±0.03mm diameter specification with every spool. Coex 3D provides filament that gives excellent-looking and strong prints.\u003c\/p\u003e\n\u003cp\u003eCoex 3D recommends the following print settings when printing with this PLA. Settings will vary depending on your specific printing setup.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHotend Temperature: 215 °C - 235 °C\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eImportant! This temperature range may seem hotter than you're used to for other PLA filaments. Using 100% virgin resin causes Coex 3D PLA to require slightly higher printing temperatures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eHeated Bed Temperature: 40 °C - 60 °C\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eNote: A heated bed is not a strict requirement when printing PLA, but using one is recommended.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eRecommended Build Surfaces\/Adhesives\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eGlass Build Surface\u003c\/li\u003e\n\u003cli\u003ePEI Build Surface\u003c\/li\u003e\n\u003cli\u003eMagigoo\u003c\/li\u003e\n\u003cli\u003ePainter's Tape\u003c\/li\u003e\n\u003cli\u003eGlue Stick\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eCooling Fan: Recommended. Up to 100% fan speed is advisable when printing PLA.\u003c\/li\u003e\n\u003cli\u003eDrying: PLA filament is hygroscopic and will absorb moisture from the air if not stored in a dry environment. If this happens, you may experience under-extrusion\/inconsistent extrusion or excess stringing. You may also hear a \"popping\" sound coming from the hotend during printing. Coex 3D recommends drying PLA at 55 °C for at least 3 hours if it has been exposed to excess humidity.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":46289644585173,"sku":"sku-41276022227127","price":24.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g","offer_id":46289909186773,"sku":"sku-41279443140791","price":19.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 5lb","offer_id":46289909285077,"sku":"sku-41279443173559","price":54.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 1kg","offer_id":46289909678293,"sku":"sku-41279443206327","price":24.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 5lb","offer_id":46289909940437,"sku":"sku-41279443239095","price":54.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0520\/1972\/4454\/files\/Pumpkin-Orange-PLA-coex3d-87087794.jpg?v=1711026492"},{"product_id":"pumpkin-orange-pla-prime","title":"COEX 3D Pumpkin Orange PLA Prime 3D Filament","description":"\u003ch1\u003eCOEX 3D Pumpkin Orange PLA Prime 3D Filament\u003c\/h1\u003e\n\u003cp\u003ePolylactic Acid (PLA) is made with natural, renewable materials, such as starch, corn or sugar cane. Because these materials make up PLA, it is better for the environment than other materials, and it can be recycled. PLA Prime is made from a higher grade resin than the already high grade PLA resin. PLA Prime is a great material for prototyping and aesthetic models. Due to the ease of printing, PLA Prime filament is a popular choice, not only for beginners, but even pros. PLA Prime is by far the most used filament by printers, beating out ABS, PETG, TPE\/TPE and Nylon for the top spot.\u003c\/p\u003e\n\u003cp\u003eCoex's PLA Prime products are made with Virgin NatureWorks USA Ingeo resin and high quality colorant only, no fillers. All of Coex's filament is made in a production facility, located in Wisconsin, USA and uses industrial grade extruders and laser measuring quality control. We provide filament that gives excellent looking \u0026amp; strong prints.\u003c\/p\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":46289644552405,"sku":"sku-41331854442679","price":32.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 5lb","offer_id":46289908465877,"sku":"sku-41331854475447","price":70.0,"currency_code":"USD","in_stock":false},{"title":"1.75mm \/ 9lb","offer_id":46289909088469,"sku":"sku-41331854508215","price":128.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0520\/1972\/4454\/files\/Pumpkin-Orange-PLA-Prime-COEX-3D-154018827.jpg?v=1711026492"},{"product_id":"rust-orange-petg","title":"COEX 3D Rust Orange PETG 3D Filament","description":"\u003ch1\u003eCOEX 3D Rust Orange PETG 3D Filament\u003c\/h1\u003e\n\u003cp\u003ePETG (PolyEthylene Terephthalate plus Glycol) is a co-polyester used in 3D printing for its durability, impact resistance, and temperature resistance. PETG is the second most popular 3D printing filament behind the ubiquitous PLA. It has qualities comparable to ABS but can be printed without an enclosure or fume handling requirements. Unlike ABS, however, PETG cannot be vapor smoothed using acetone.\u003c\/p\u003e\n\u003cp\u003eCoex 3D Rust Orange PETG is made with Virgin resin and high-quality colorant only, with no fillers. All of Coex's filament is made in a production facility located in Wisconsin, USA. Coex 3D uses industrial-grade extruders and laser measuring quality control to ensure quality, consistency, and a 1.75±0.03mm diameter specification with every spool. Coex 3D provides filament that gives excellent-looking and strong prints.\u003c\/p\u003e\n\u003cp\u003eCoex 3D recommends the following settings when printing with this PETG. Settings will vary depending on your specific print setup.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHotend Temperature: 230 °C - 245 °C\u003c\/li\u003e\n\u003cli\u003eBed Temperature: 70 °C - 90 °C\u003c\/li\u003e\n\u003cli\u003eHeated Bed Recommended\u003c\/li\u003e\n\u003cli\u003eRecommended Build Surfaces\/Adhesives:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003ePEI Build Surface\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eGlass Build Surface\u003c\/li\u003e\n\u003cli\u003eMagigoo\u003c\/li\u003e\n\u003cli\u003eGlue Stick\u003c\/li\u003e\n\u003cli\u003ePainter's Tape\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eCooling Fan: Recommended. PETG works best with slightly less cooling than PLA. 50-75% fan speed is recommended.\u003c\/li\u003e\n\u003cli\u003eIMPORTANT NOTE! PETG can fuse to glass and PEI print surfaces, causing damage to the print bed when the part is removed. For that reason, Coex 3D recommends always using an additional adhesion agent (such as glue stick or Magigoo) which will help the finished part to release from the print bed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOther Printing Tips\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePETG is slightly more hygroscopic than PLA, so drying your filament can be necessary if it is exposed to humidity. Coex 3D recommends drying this PETG at 65 °C for at least 3 hours. You can tell when your filament needs drying if you experience under-extrusion\/inconsistent extrusion, and\/or excess stringing. Hearing a \"popping\" sound during a print is another sign of filament that needs to be dried.\u003c\/li\u003e\n\u003cli\u003ePETG can often result in more stringing than would be expected with PLA or similar filaments. There are a few steps you can take to reduce stringing:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eReduce print temperature. Keep in mind that reducing print temperature will slightly decrease layer adhesion and part strength, but can help reduce stringing.\u003c\/li\u003e\n\u003cli\u003eIncrease retraction. Increasing retraction length can help reduce stringing, especially on Bowden-style extrusion configurations.\u003c\/li\u003e\n\u003cli\u003eEnable \"Wipe while Retracting\" in your slicer. Most slicers allow for this option, which will start a travel move just before\/during the filament retraction. This helps \"wipe off\" the nozzle as a travel move starts, reducing stringing.\u003c\/li\u003e\n\u003cli\u003eEnable \"Combing Mode\" (Cura) or \"Avoid Crossing Perimeters\" (PrusaSlicer\/SuperSlicer\/etc.). Rather than travel moves always going in a straight line, this will cause them to choose a path that avoids crossing over perimeters, effectively keeping the nozzle \"inside\" the print area wherever possible. This eliminates stringing right at the source but still cannot eliminate it all (such as between multiple parts).\u003c\/li\u003e\n\u003cli\u003eUnfortunately in many cases stringing is impossible to fully eliminate, so some post-processing of prints is often necessary.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":46289644650709,"sku":"sku-41279443402935","price":33.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g","offer_id":46289908367573,"sku":"sku-41279443435703","price":21.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 5lb","offer_id":46289908498645,"sku":"sku-41279443468471","price":71.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 1kg","offer_id":46289909121237,"sku":"sku-41279443501239","price":33.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 5lb","offer_id":46289909219541,"sku":"sku-41279443534007","price":71.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0520\/1972\/4454\/files\/Rust-Orange-PETG-coex3d-87110957.jpg?v=1711026492"},{"product_id":"salsa-red-asa-prime","title":"COEX 3D Salsa Red ASA Prime 3D Filament","description":"\u003ch1\u003eCOEX 3D Salsa Red ASA Prime 3D Filament\u003c\/h1\u003e\n\u003cp\u003eExperience Durability with Salsa Red ASA Prime\u003c\/p\u003e\n\u003cp\u003eASA filament (acrylonitrile styrene acrylate) is a thermoplastic 3D printing material that is perfect in many ways and is suitable for many different applications. It has a similar chemical makeup to ABS plastic but offers three notable improvements: better mechanical properties, it is naturally UV resistant, and it simply produces amazing finished prints. Coex 3D offers ASA in the same colors as ABS giving you 11 colors to choose from and is available in both 1.75mm and 2.85mm diameters in varying spool sizes.\u003c\/p\u003e\n\u003cp\u003eAlthough ASA can safely be printed using an open bed printer, it is still recommended to print ASA in an enclosed printer which will allow parts to cool slowly and uniformly which helps to prevent shrinkage and warping.\u003c\/p\u003e\n\u003cp\u003eCoex 3D’s ASA products are made with 100% virgin resin and high-quality colorants with no added fillers. All Coex 3D filament is made in a production facility in Green Bay, WI, USA using industrial-grade extruders and laser measuring quality control to ensure quality and consistency with every spool.\u003c\/p\u003e\n\u003cp\u003eLooking for a high-performance 3D printing polymer that provides excellent UV stability and weather resistance? Look no further than Salsa Red ASA Prime, the perfect choice for your 3D printing needs.\u003c\/p\u003e\n\u003cp\u003eCoex 3D’s Salsa Red ASA Prime is an Acrylonitrile Styrene Acrylate (ASA) polymer that is specifically formulated for 3D printing. It offers the ideal balance of mechanical strength, toughness, stiffness, and weather resistance that you can rely on for extended periods.\u003c\/p\u003e\n\u003cp\u003eSalsa Red ASA Prime is well-suited for outdoor and automotive applications thanks to its exceptional weather resistance and UV stability. Coex 3D’s ASA polymer is perfect for creating functional prototypes, end-use parts, and low-volume production runs.\u003c\/p\u003e\n\u003cp\u003eIf you are looking for a material that can withstand harsh weather conditions, retain its color and mechanical properties in direct sunlight, and provide long-lasting performance, then Salsa Red ASA Prime is the right choice for you. With its easy-to-print characteristics and excellent layer adhesion, this ASA filament offers great value for money.\u003c\/p\u003e\n\u003cp\u003eGet your hands on Salsa Red ASA Prime today and experience the optimal balance of rigidity, toughness, UV resistance, and weather ability. Buy now and start creating durable, high-quality 3D prints that will last for years to come!\u003c\/p\u003e\n\u003cp\u003eCoex 3D recommends the following print settings when printing with this ASA. Settings will vary depending on your specific printing setup.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHotend Temperature: 235 °C - 245 °C\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eImportant! This temperature range may seem hotter than you're used to for other ASA filaments. Using 100% virgin resin causes Coex 3D ASA to require slightly higher printing temperatures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeated Bed Temperature: 80 °C - 1000 °C\u003c\/li\u003e\n\u003cli\u003eRecommended Build Surfaces\/Adhesives\n\u003cul\u003e\n\u003cli\u003eGlass Build Surface\u003c\/li\u003e\n\u003cli\u003ePEI Build Surface\u003c\/li\u003e\n\u003cli\u003eMagigoo\u003c\/li\u003e\n\u003cli\u003ePainter's Tape\u003c\/li\u003e\n\u003cli\u003eGlue Stick\u003c\/li\u003e\n\u003cli\u003eABS slurry\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eCooling Fan: Recommended.\u003c\/li\u003e\n\u003cli\u003eEnclosure: Recommended to prevent warping\u003c\/li\u003e\n\u003cli\u003eDrying: ASA filament is hygroscopic and will absorb moisture from the air if not stored in a dry environment. If this happens, you may experience under-extrusion\/inconsistent extrusion or excess stringing. You may also hear a \"popping\" sound coming from the hotend during printing. Coex 3D recommends drying ASA at 65 °C for at least 3 hours if it has been exposed to excess humidity.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":46289644814549,"sku":"sku-41868052725943","price":34.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g","offer_id":46289907876053,"sku":"sku-41868052693175","price":21.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 1kg","offer_id":46289908302037,"sku":"sku-41868052758711","price":34.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 5lb","offer_id":46289908433109,"sku":"sku-42177875968183","price":75.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 5lb","offer_id":46289909055701,"sku":"sku-42177876230327","price":75.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0520\/1972\/4454\/files\/Salsa-Red-ASA-Prime-COEX-3D-87126294.jpg?v=1711026493"},{"product_id":"neon-green-pla","title":"COEX 3D Neon Green PLA 3D Filament","description":"\u003ch1\u003eCOEX 3D Neon Green PLA 3D Filament\u003c\/h1\u003e\n\u003cp\u003eThe most environment-friendly 3D filament solution. Because of its low toxicity and ease of printing, PLA (Polylactic Acid) filament is a very popular choice in the 3D printing community. It looks great, is extremely easy to print with, and has generally good mechanical properties. It's perfect for prototypes and decorative models.\u003c\/p\u003e\n\u003cp\u003eCoex 3D Neon Green PLA is made with Virgin NatureWorks USA Ingeo resin and high-quality colorant only, with no fillers. All of Coex's filament is made in a production facility located in Wisconsin, USA. Coex 3D uses industrial-grade extruders and laser measuring quality control to ensure quality, consistency, and a 1.75±0.03mm diameter specification with every spool. Coex 3D provides filament that gives excellent-looking and strong prints.\u003c\/p\u003e\n\u003cp\u003eCoex 3D recommends the following print settings when printing with this PLA. Settings will vary depending on your specific printing setup.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHotend Temperature: 215 °C - 235 °C\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eImportant! This temperature range may seem hotter than you're used to for other PLA filaments. Using 100% virgin resin causes Coex 3D PLA to require slightly higher printing temperatures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eHeated Bed Temperature: 40 °C - 60 °C\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eNote: A heated bed is not a strict requirement when printing PLA, but using one is recommended.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eRecommended Build Surfaces\/Adhesives\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eGlass Build Surface\u003c\/li\u003e\n\u003cli\u003ePEI Build Surface\u003c\/li\u003e\n\u003cli\u003eMagigoo\u003c\/li\u003e\n\u003cli\u003ePainter's Tape\u003c\/li\u003e\n\u003cli\u003eGlue Stick\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eCooling Fan: Recommended. Up to 100% fan speed is advisable when printing PLA.\u003c\/li\u003e\n\u003cli\u003eDrying: PLA filament is hygroscopic and will absorb moisture from the air if not stored in a dry environment. If this happens, you may experience under-extrusion\/inconsistent extrusion or excess stringing. You may also hear a \"popping\" sound coming from the hotend during printing. Coex 3D recommends drying PLA at 55 °C for at least 3 hours if it has been exposed to excess humidity.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":46289645535445,"sku":"sku-41294751105207","price":24.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g","offer_id":46289907515605,"sku":"sku-41276018720951","price":19.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 5lb","offer_id":46289907613909,"sku":"sku-41294751137975","price":54.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 15lb","offer_id":46289908269269,"sku":"sku-41294751203511","price":162.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 1kg","offer_id":46289908400341,"sku":"sku-41294751269047","price":24.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 5lb","offer_id":46289908695253,"sku":"sku-41294751301815","price":54.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 15lb","offer_id":46289909154005,"sku":"sku-41297167188151","price":162.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0520\/1972\/4454\/files\/Neon-Green-PLA-coex3d-87085393.jpg?v=1711026492"},{"product_id":"matte-black-petg","title":"COEX 3D Matte Black PETG 3D Filament","description":"\u003ch1\u003eCOEX 3D Matte Black PETG 3D Filament\u003c\/h1\u003e\n\u003cp\u003ePETG (PolyEthylene Terephthalate plus Glycol) is a co-polyester used in 3D printing for its durability, impact resistance, and temperature resistance. PETG is the second most popular 3D printing filament behind the ubiquitous PLA. It has qualities comparable to ABS but can be printed without an enclosure or fume handling requirements. Unlike ABS, however, PETG cannot be vapor smoothed using acetone.\u003c\/p\u003e\n\u003cp\u003eCoex 3D Matte Black PETG is made with Virgin resin, high-quality colorant, and an organic matte additive only, with no fillers. All of Coex's filament is made in a production facility located in Wisconsin, USA. Coex 3D uses industrial-grade extruders and laser measuring quality control to ensure quality, consistency, and a 1.75±0.03mm diameter specification with every spool. Coex 3D provides filament that gives excellent-looking and strong prints.\u003c\/p\u003e\n\u003cp\u003eCoex 3D recommends the following settings when printing with this PETG. Settings will vary depending on your specific print setup.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHotend Temperature: 230 °C - 245 °C\u003c\/li\u003e\n\u003cli\u003eBed Temperature: 70 °C - 90 °C\u003c\/li\u003e\n\u003cli\u003eHeated Bed Recommended\u003c\/li\u003e\n\u003cli\u003eRecommended Build Surfaces\/Adhesives:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003ePEI Build Surface\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eGlass Build Surface\u003c\/li\u003e\n\u003cli\u003eMagigoo\u003c\/li\u003e\n\u003cli\u003eGlue Stick\u003c\/li\u003e\n\u003cli\u003ePainter's Tape\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eCooling Fan: Recommended. PETG works best with slightly less cooling than PLA. 50-75% fan speed is recommended.\u003c\/li\u003e\n\u003cli\u003eIMPORTANT NOTE! PETG can fuse to glass and PEI print surfaces, causing damage to the print bed when the part is removed. For that reason, Coex 3D recommends always using an additional adhesion agent (such as glue stick or Magigoo) which will help the finished part to release from the print bed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOther Printing Tips\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePETG is slightly more hygroscopic than PLA, so drying your filament can be necessary if it is exposed to humidity. Coex 3D recommends drying PETG at 65 °C for at least 3 hours. You can tell when your filament needs drying if you experience under-extrusion\/inconsistent extrusion, and\/or excess stringing. Hearing a \"popping\" sound during a print is another sign of filament that needs to be dried.\u003c\/li\u003e\n\u003cli\u003ePETG can often result in more stringing than would be expected with PLA or similar filaments. There are a few steps you can take to reduce stringing:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eReduce print temperature. Keep in mind that reducing print temperature will slightly decrease layer adhesion and part strength, but can help reduce stringing.\u003c\/li\u003e\n\u003cli\u003eIncrease retraction. Increasing retraction length can help reduce stringing, especially on Bowden-style extrusion configurations.\u003c\/li\u003e\n\u003cli\u003eEnable \"Wipe while Retracting\" in your slicer. Most slicers allow for this option, which will start a travel move just before\/during the filament retraction. This helps \"wipe off\" the nozzle as a travel move starts, reducing stringing.\u003c\/li\u003e\n\u003cli\u003eEnable \"Combing Mode\" (Cura) or \"Avoid Crossing Perimeters\" (PrusaSlicer\/SuperSlicer\/etc.). Rather than travel moves always going in a straight line, this will cause them to choose a path that avoids crossing over perimeters, effectively keeping the nozzle \"inside\" the print area wherever possible. This eliminates stringing right at the source but still cannot eliminate it all (such as between multiple parts).\u003c\/li\u003e\n\u003cli\u003eUnfortunately in many cases stringing is impossible to fully eliminate, so some post-processing of prints is often necessary.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":46289645174997,"sku":"sku-42384455008439","price":38.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g","offer_id":46551581425877,"sku":"sku-42384455139511","price":24.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 5lb","offer_id":46289907450069,"sku":"sku-42384455172279","price":85.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 1kg","offer_id":46551582572757,"sku":"sku-42384455270583","price":38.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 5lb","offer_id":46551582933205,"sku":"sku-42384455303351","price":85.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 9lb","offer_id":51944651194581,"sku":"CX13-0900-30-9LB","price":150.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 15lb","offer_id":50989749764309,"sku":"CX13-0900-18-9LB","price":250.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 9lb","offer_id":51944886370517,"sku":"CX13-0900-18-9LB","price":150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0520\/1972\/4454\/files\/Matte-Black-PETG-coex3d-176849211.jpg?v=1711026492"},{"product_id":"salsa-red-petg","title":"COEX 3D Salsa Red PETG 3D Filament","description":"\u003ch1\u003eCOEX 3D Salsa Red PETG 3D Filament\u003c\/h1\u003e\n\u003cp\u003ePETG (PolyEthylene Terephthalate plus Glycol) is a co-polyester used in 3D printing for its durability, impact resistance, and temperature resistance. PETG is the second most popular 3D printing filament behind the ubiquitous PLA. It has qualities comparable to ABS but can be printed without an enclosure or fume handling requirements. Unlike ABS, however, PETG cannot be vapor smoothed using acetone.\u003c\/p\u003e\n\u003cp\u003eCoex 3D Salsa Red PETG is made with Virgin resin and high-quality colorant only, with no fillers. All of Coex's filament is made in a production facility located in Wisconsin, USA. Coex 3D uses industrial-grade extruders and laser measuring quality control to ensure quality, consistency, and a 1.75±0.03mm diameter specification with every spool. Coex 3D provides filament that gives excellent-looking and strong prints.\u003c\/p\u003e\n\u003cp\u003eCoex 3D recommends the following settings when printing with this PETG. Settings will vary depending on your specific print setup.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHotend Temperature: 230 °C - 245 °C\u003c\/li\u003e\n\u003cli\u003eBed Temperature: 70 °C - 90 °C\u003c\/li\u003e\n\u003cli\u003eHeated Bed Recommended\u003c\/li\u003e\n\u003cli\u003eRecommended Build Surfaces\/Adhesives:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003ePEI Build Surface\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eGlass Build Surface\u003c\/li\u003e\n\u003cli\u003eMagigoo\u003c\/li\u003e\n\u003cli\u003eGlue Stick\u003c\/li\u003e\n\u003cli\u003ePainter's Tape\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eCooling Fan: Recommended. PETG works best with slightly less cooling than PLA. 50-75% fan speed is recommended.\u003c\/li\u003e\n\u003cli\u003eIMPORTANT NOTE! PETG can fuse to glass and PEI print surfaces, causing damage to the print bed when the part is removed. For that reason, Coex 3D recommends always using an additional adhesion agent (such as glue stick or Magigoo) which will help the finished part to release from the print bed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOther Printing Tips\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePETG is slightly more hygroscopic than PLA, so drying your filament can be necessary if it is exposed to humidity. Coex 3D recommends drying PETG at 65 °C for at least 3 hours. You can tell when your filament needs drying if you experience under-extrusion\/inconsistent extrusion, and\/or excess stringing. Hearing a \"popping\" sound during a print is another sign of filament that needs to be dried.\u003c\/li\u003e\n\u003cli\u003ePETG can often result in more stringing than would be expected with PLA or similar filaments. There are a few steps you can take to reduce stringing:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eReduce print temperature. Keep in mind that reducing print temperature will slightly decrease layer adhesion and part strength, but can help reduce stringing.\u003c\/li\u003e\n\u003cli\u003eIncrease retraction. Increasing retraction length can help reduce stringing, especially on Bowden-style extrusion configurations.\u003c\/li\u003e\n\u003cli\u003eEnable \"Wipe while Retracting\" in your slicer. Most slicers allow for this option, which will start a travel move just before\/during the filament retraction. This helps \"wipe off\" the nozzle as a travel move starts, reducing stringing.\u003c\/li\u003e\n\u003cli\u003eEnable \"Combing Mode\" (Cura) or \"Avoid Crossing Perimeters\" (PrusaSlicer\/SuperSlicer\/etc.). Rather than travel moves always going in a straight line, this will cause them to choose a path that avoids crossing over perimeters, effectively keeping the nozzle \"inside\" the print area wherever possible. This eliminates stringing right at the source but still cannot eliminate it all (such as between multiple parts).\u003c\/li\u003e\n\u003cli\u003eUnfortunately in many cases stringing is impossible to fully eliminate, so some post-processing of prints is often necessary.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":46289645502677,"sku":"sku-41279444385975","price":33.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g","offer_id":46289906729173,"sku":"sku-41279444418743","price":21.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 5lb","offer_id":46289906794709,"sku":"sku-41279444320439","price":71.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 15lb","offer_id":46289907089621,"sku":"sku-41279444353207","price":206.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 1kg","offer_id":46289907482837,"sku":"sku-41279444484279","price":33.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 5lb","offer_id":46289907581141,"sku":"sku-41279444451511","price":71.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 15lb","offer_id":46289907843285,"sku":"sku-41279444517047","price":206.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0520\/1972\/4454\/files\/Salsa-Red-PETG-coex3d-87111441.jpg?v=1711026497"},{"product_id":"salsa-red-pla","title":"COEX 3D Salsa Red PLA 3D Filament","description":"\u003ch1\u003eCOEX 3D Salsa Red PLA 3D Filament\u003c\/h1\u003e\n\u003cp\u003eThe most environment-friendly 3D filament solution. Because of its low toxicity and ease of printing, PLA (Polylactic Acid) filament is a very popular choice in the 3D printing community. It looks great, is extremely easy to print with, and has generally good mechanical properties. It's perfect for prototypes and decorative models.\u003c\/p\u003e\n\u003cp\u003eCoex 3D Salsa Red PLA is made with Virgin NatureWorks USA Ingeo resin and high-quality colorant only, with no fillers. All of Coex's filament is made in a production facility located in Wisconsin, USA. Coex 3D uses industrial-grade extruders and laser measuring quality control to ensure quality, consistency, and a 1.75±0.03mm diameter specification with every spool. Coex 3D provides filament that gives excellent-looking and strong prints.\u003c\/p\u003e\n\u003cp\u003eCoex 3D recommends the following print settings when printing with this PLA. Settings will vary depending on your specific printing setup.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHotend Temperature: 215 °C - 235 °C\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eImportant! This temperature range may seem hotter than you're used to for other PLA filaments. Using 100% virgin resin causes Coex 3D PLA to require slightly higher printing temperatures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eHeated Bed Temperature: 40 °C - 60 °C\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eNote: A heated bed is not a strict requirement when printing PLA, but using one is recommended.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eRecommended Build Surfaces\/Adhesives\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eGlass Build Surface\u003c\/li\u003e\n\u003cli\u003ePEI Build Surface\u003c\/li\u003e\n\u003cli\u003eMagigoo\u003c\/li\u003e\n\u003cli\u003ePainter's Tape\u003c\/li\u003e\n\u003cli\u003eGlue Stick\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eCooling Fan: Recommended. Up to 100% fan speed is advisable when printing PLA.\u003c\/li\u003e\n\u003cli\u003eDrying: PLA filament is hygroscopic and will absorb moisture from the air if not stored in a dry environment. If this happens, you may experience under-extrusion\/inconsistent extrusion or excess stringing. You may also hear a \"popping\" sound coming from the hotend during printing. Coex 3D recommends drying PLA at 55 °C for at least 3 hours if it has been exposed to excess humidity.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":46289645338837,"sku":"sku-41291782226103","price":24.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g","offer_id":46289906008277,"sku":"sku-41279444222135","price":19.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 5lb","offer_id":46289906303189,"sku":"sku-41291782258871","price":54.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 1kg","offer_id":46289906761941,"sku":"sku-41291782389943","price":24.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 5lb","offer_id":46289906827477,"sku":"sku-41291782422711","price":54.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 15lb","offer_id":50825976840405,"sku":"CX02-1500-30-15LB","price":162.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0520\/1972\/4454\/files\/Salsa-Red-PLA-coex3d-118098266.jpg?v=1711026492"},{"product_id":"scarlet-red-petg","title":"COEX 3D Scarlet Red PETG 3D Filament","description":"\u003ch1\u003eCOEX 3D Scarlet Red PETG 3D Filament\u003c\/h1\u003e\n\u003cp\u003ePETG (PolyEthylene Terephthalate plus Glycol) is a co-polyester used in 3D printing for its durability, impact resistance, and temperature resistance. PETG is the second most popular 3D printing filament behind the ubiquitous PLA. It has qualities comparable to ABS but can be printed without an enclosure or fume handling requirements. Unlike ABS, however, PETG cannot be vapor smoothed using acetone.\u003c\/p\u003e\n\u003cp\u003eCoex 3D Scarlet Red PETG is made with Virgin resin and high-quality colorant only, with no fillers. All of Coex's filament is made in a production facility located in Wisconsin, USA. Coex 3D uses industrial-grade extruders and laser measuring quality control to ensure quality, consistency, and a 1.75±0.03mm diameter specification with every spool. Coex 3D provides filament that gives excellent-looking and strong prints.\u003c\/p\u003e\n\u003cp\u003eCoex 3D recommends the following settings when printing with this PETG. Settings will vary depending on your specific print setup.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHotend Temperature: 230 °C - 245 °C\u003c\/li\u003e\n\u003cli\u003eBed Temperature: 70 °C - 90 °C\u003c\/li\u003e\n\u003cli\u003eHeated Bed Recommended\u003c\/li\u003e\n\u003cli\u003eRecommended Build Surfaces\/Adhesives:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003ePEI Build Surface\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eGlass Build Surface\u003c\/li\u003e\n\u003cli\u003eMagigoo\u003c\/li\u003e\n\u003cli\u003eGlue Stick\u003c\/li\u003e\n\u003cli\u003ePainter's Tape\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eCooling Fan: Recommended. PETG works best with slightly less cooling than PLA. 50-75% fan speed is recommended.\u003c\/li\u003e\n\u003cli\u003eIMPORTANT NOTE! PETG can fuse to glass and PEI print surfaces, causing damage to the print bed when the part is removed. For that reason, Coex 3D recommends always using an additional adhesion agent (such as glue stick or Magigoo) which will help the finished part to release from the print bed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOther Printing Tips\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePETG is slightly more hygroscopic than PLA, so drying your filament can be necessary if it is exposed to humidity. Coex 3D recommends drying PETG at 65 °C for at least 3 hours. You can tell when your filament needs drying if you experience under-extrusion\/inconsistent extrusion, and\/or excess stringing. Hearing a \"popping\" sound during a print is another sign of filament that needs to be dried.\u003c\/li\u003e\n\u003cli\u003ePETG can often result in more stringing than would be expected with PLA or similar filaments. There are a few steps you can take to reduce stringing:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eReduce print temperature. Keep in mind that reducing print temperature will slightly decrease layer adhesion and part strength, but can help reduce stringing.\u003c\/li\u003e\n\u003cli\u003eIncrease retraction. Increasing retraction length can help reduce stringing, especially on Bowden-style extrusion configurations.\u003c\/li\u003e\n\u003cli\u003eEnable \"Wipe while Retracting\" in your slicer. Most slicers allow for this option, which will start a travel move just before\/during the filament retraction. This helps \"wipe off\" the nozzle as a travel move starts, reducing stringing.\u003c\/li\u003e\n\u003cli\u003eEnable \"Combing Mode\" (Cura) or \"Avoid Crossing Perimeters\" (PrusaSlicer\/SuperSlicer\/etc.). Rather than travel moves always going in a straight line, this will cause them to choose a path that avoids crossing over perimeters, effectively keeping the nozzle \"inside\" the print area wherever possible. This eliminates stringing right at the source but still cannot eliminate it all (such as between multiple parts).\u003c\/li\u003e\n\u003cli\u003eUnfortunately in many cases stringing is impossible to fully eliminate, so some post-processing of prints is often necessary.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":46289645600981,"sku":"sku-41279444549815","price":33.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g","offer_id":46289905549525,"sku":"sku-41279444582583","price":21.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 5lb","offer_id":46289905975509,"sku":"sku-41279444615351","price":71.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 1kg","offer_id":46289906270421,"sku":"sku-41279444648119","price":33.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 5lb","offer_id":46289906368725,"sku":"sku-41279444680887","price":71.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0520\/1972\/4454\/files\/Scarlet-Red-PETG-coex3d-176530428.jpg?v=1711026493"},{"product_id":"shamrock-green-abs","title":"COEX 3D Shamrock Green ABS 3D Filament","description":"\u003ch1\u003eCOEX 3D Shamrock Green ABS 3D Filament\u003c\/h1\u003e\n\u003cp\u003eABS filament is a thermoplastic 3d printer filament ABS, which stands for Acrylonitrile Butadiene Styrene. It easily molds when heated and sets evenly when cooled. ABS filament is used by a variety of manufacturing industries for parts requiring structural integrity and detail, and is ideal for “wear and tear” projects. It is commonly used in rapid prototyping and additive manufacturing environments to test product impact resistance and durability. It is also popular with 3D printing hobbyist who utilize 3D printing in their home or at a local maker faire. This 3D printer filament comes in a variety of colors and is available in 1.75 and 2.85 MM in diameter, and comes in 500 g, 5 lbs, 15 lbs and 1 kg.\u003c\/p\u003e\n\u003cp\u003eAs opposed to PLA and PETG filament, ABS is a bit more technical and may be more challenging for new 3D printing users and requires the use of an enclosed 3D printer. ABS is a stiff 3D printing material and it is impact and heat resistant. Common applications for ABS include end-use tools, moving parts, and parts that have to withstand high mechanical stress.\u003c\/p\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":46289645469909,"sku":"sku-41279444975799","price":30.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g","offer_id":46289905221845,"sku":"sku-41279445008567","price":22.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 5lb","offer_id":46289905483989,"sku":"sku-41279445041335","price":68.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0520\/1972\/4454\/files\/Shamrock-Green-ABS-coex3d-87112149.jpg?v=1711026492"},{"product_id":"scarlet-red-pla","title":"COEX 3D Scarlet Red PLA 3D Filament","description":"\u003ch1\u003eCOEX 3D Scarlet Red PLA 3D Filament\u003c\/h1\u003e\n\u003cp\u003eThe most environment-friendly 3D filament solution. Because of its low toxicity and ease of printing, PLA (Polylactic Acid) filament is a very popular choice in the 3D printing community. It looks great, is extremely easy to print with, and has generally good mechanical properties. It's perfect for prototypes and decorative models.\u003c\/p\u003e\n\u003cp\u003eCoex 3D Scarlet Red PLA is made with Virgin NatureWorks USA Ingeo resin and high-quality colorant only, with no fillers. All of Coex's filament is made in a production facility located in Wisconsin, USA. Coex 3D uses industrial-grade extruders and laser measuring quality control to ensure quality, consistency, and a 1.75±0.03mm diameter specification with every spool. Coex 3D provides filament that gives excellent-looking and strong prints.\u003c\/p\u003e\n\u003cp\u003eCoex 3D recommends the following print settings when printing with this PLA. Settings will vary depending on your specific printing setup.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHotend Temperature: 215 °C - 235 °C\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eImportant! This temperature range may seem hotter than you're used to for other PLA filaments. Using 100% virgin resin causes Coex 3D PLA to require slightly higher printing temperatures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eHeated Bed Temperature: 40 °C - 60 °C\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eNote: A heated bed is not a strict requirement when printing PLA, but using one is recommended.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eRecommended Build Surfaces\/Adhesives\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eGlass Build Surface\u003c\/li\u003e\n\u003cli\u003ePEI Build Surface\u003c\/li\u003e\n\u003cli\u003eMagigoo\u003c\/li\u003e\n\u003cli\u003ePainter's Tape\u003c\/li\u003e\n\u003cli\u003eGlue Stick\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eCooling Fan: Recommended. Up to 100% fan speed is advisable when printing PLA.\u003c\/li\u003e\n\u003cli\u003eDrying: PLA filament is hygroscopic and will absorb moisture from the air if not stored in a dry environment. If this happens, you may experience under-extrusion\/inconsistent extrusion or excess stringing. You may also hear a \"popping\" sound coming from the hotend during printing. Coex 3D recommends drying PLA at 55 °C for at least 3 hours if it has been exposed to excess humidity.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":46289646452949,"sku":"sku-41279444746423","price":24.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g","offer_id":46289904763093,"sku":"sku-41279444779191","price":19.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 5lb","offer_id":46289905254613,"sku":"sku-41279444713655","price":54.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 9lb","offer_id":46289905516757,"sku":"sku-41790075470007","price":97.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 1kg","offer_id":46289905942741,"sku":"sku-41279444844727","price":24.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 5lb","offer_id":46289906041045,"sku":"sku-41279444811959","price":54.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 15lb","offer_id":46289906335957,"sku":"sku-41297180426423","price":162.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 15lb","offer_id":53323820892373,"sku":"CX02-1500-18-15LB","price":162.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0520\/1972\/4454\/files\/Scarlet-Red-PLA-coex3d-87111826.jpg?v=1711026493"},{"product_id":"taxicab-yellow-pla","title":"COEX 3D Taxicab Yellow PLA 3D Filament","description":"\u003ch1\u003eCOEX 3D Taxicab Yellow PLA 3D Filament\u003c\/h1\u003e\n\u003cp\u003eThe most environment-friendly 3D filament solution. Because of its low toxicity and ease of printing, PLA (Polylactic Acid) filament is a very popular choice in the 3D printing community. It looks great, is extremely easy to print with, and has generally good mechanical properties. It's perfect for prototypes and decorative models.\u003c\/p\u003e\n\u003cp\u003eCoex 3D Taxicab Yellow PLA is made with Virgin NatureWorks USA Ingeo resin and high-quality colorant only, with no fillers. All of Coex's filament is made in a production facility located in Wisconsin, USA. Coex 3D uses industrial-grade extruders and laser measuring quality control to ensure quality, consistency, and a 1.75±0.03mm diameter specification with every spool. Coex 3Ds provide filament that gives excellent-looking and strong prints.\u003c\/p\u003e\n\u003cp\u003eCoex 3D recommends the following print settings when printing with this PLA. Settings will vary depending on your specific printing setup.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHotend Temperature: 215 °C - 235 °C\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eImportant! This temperature range may seem hotter than you're used to for other PLA filaments. Using 100% virgin resin causes Coex 3D PLA to require slightly higher printing temperatures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eHeated Bed Temperature: 40 °C - 60 °C\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eNote: A heated bed is not a strict requirement when printing PLA, but using one is recommended.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eRecommended Build Surfaces\/Adhesives\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eGlass Build Surface\u003c\/li\u003e\n\u003cli\u003ePEI Build Surface\u003c\/li\u003e\n\u003cli\u003eMagigoo\u003c\/li\u003e\n\u003cli\u003ePainter's Tape\u003c\/li\u003e\n\u003cli\u003eGlue Stick\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eCooling Fan: Recommended. Up to 100% fan speed is advisable when printing PLA.\u003c\/li\u003e\n\u003cli\u003eDrying: PLA filament is hygroscopic and will absorb moisture from the air if not stored in a dry environment. If this happens, you may experience under-extrusion\/inconsistent extrusion or excess stringing. You may also hear a \"popping\" sound coming from the hotend during printing. Coex 3D recommends drying PLA at 55 °C for at least 3 hours if it has been exposed to excess humidity.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":46289645994197,"sku":"sku-41294764802231","price":24.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g","offer_id":46289904632021,"sku":"sku-41276018458807","price":19.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 5lb","offer_id":46289905156309,"sku":"sku-41294764834999","price":54.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 1kg","offer_id":46289905451221,"sku":"sku-41294764966071","price":24.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 5lb","offer_id":46289905680597,"sku":"sku-41294764998839","price":54.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0520\/1972\/4454\/files\/Taxicab-Yellow-PLA-coex3d-87085063.jpg?v=1711026492"},{"product_id":"translucent-blood-red-pla","title":"COEX 3D Translucent Blood Red PLA 3D Filament","description":"\u003ch1\u003eCOEX 3D Translucent Blood Red PLA 3D Filament\u003c\/h1\u003e\n\u003cp\u003eThe most environment-friendly 3D filament solution. Because of its low toxicity and ease of printing, PLA (Polylactic Acid) filament is a very popular choice in the 3D printing community. It looks great, is extremely easy to print with, and has generally good mechanical properties. It's perfect for prototypes and decorative models.\u003c\/p\u003e\n\u003cp\u003eCoex 3D Translucent Blood Red PLA is made with Virgin NatureWorks USA Ingeo resin and high-quality colorant only, with no fillers. All of Coex's filament is made in a production facility located in Wisconsin, USA. Coex 3D uses industrial-grade extruders and laser measuring quality control to ensure quality, consistency, and a 1.75±0.03mm diameter specification with every spool. Coex 3D provides filament that gives excellent-looking and strong prints.\u003c\/p\u003e\n\u003cp\u003eCoex 3D recommends the following print settings when printing with this PLA. Settings will vary depending on your specific printing setup.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHotend Temperature: 215 °C - 235 °C\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eImportant! This temperature range may seem hotter than you're used to for other PLA filaments. Using 100% virgin resin causes Coex 3D PLA to require slightly higher printing temperatures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eHeated Bed Temperature: 40 °C - 60 °C\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eNote: A heated bed is not a strict requirement when printing PLA, but using one is recommended.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eRecommended Build Surfaces\/Adhesives\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eGlass Build Surface\u003c\/li\u003e\n\u003cli\u003ePEI Build Surface\u003c\/li\u003e\n\u003cli\u003eMagigoo\u003c\/li\u003e\n\u003cli\u003ePainter's Tape\u003c\/li\u003e\n\u003cli\u003eGlue Stick\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eCooling Fan: Recommended. Up to 100% fan speed is advisable when printing PLA.\u003c\/li\u003e\n\u003cli\u003eDrying: PLA filament is hygroscopic and will absorb moisture from the air if not stored in a dry environment. If this happens, you may experience under-extrusion\/inconsistent extrusion or excess stringing. You may also hear a \"popping\" sound coming from the hotend during printing. Coex 3D recommends drying PLA at 55 °C for at least 3 hours if it has been exposed to excess humidity.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":46289646584021,"sku":"sku-41279446024375","price":24.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g","offer_id":46289904107733,"sku":"sku-41297265066167","price":19.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 5lb","offer_id":46289904599253,"sku":"sku-41279446057143","price":54.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 1kg","offer_id":46289904730325,"sku":"sku-41279446089911","price":24.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 5lb","offer_id":46289905189077,"sku":"sku-41279446122679","price":54.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0520\/1972\/4454\/files\/Translucent-Blood-Red-PLA-coex3d-87112998.jpg?v=1711026492"},{"product_id":"scarlet-red-pla-prime","title":"COEX 3D Scarlet Red PLA Prime 3D Filament","description":"\u003ch1\u003eCOEX 3D Scarlet Red PLA Prime 3D Filament\u003c\/h1\u003e\n\u003cp\u003ePolylactic Acid is a biodegradable, eco-friendly plastic, known for its ease of use and low warpage quality. PLA Prime is Coex 3D's high performance PLA 3D printing filament. It is made from Natureworks Ingeo 3D850 and shows improved heat resistance, more toughness, good adhesion and less warping or curling than traditional PLA. PLA was always the go-to basic filament and is still recommended when you start your journey with 3D printing, without needing to change any of your profiles you can up your game by printing with Coex 3D PLA Prime - available in most standard PLA colors.\u003c\/p\u003e\n\u003cp\u003eThis high performance material will be perfect for that special print or prototype that you've been wanting to make but weren't sure if PLA was the best material for the job. Please realize though that all grades of PLA will still have limitations. If you truly need high strength and high heat resistance you may want to explore other materials for your project or part.\u003c\/p\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":46289646616789,"sku":"sku-41276021506231","price":32.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g","offer_id":46289903845589,"sku":"sku-41279444910263","price":24.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 5lb","offer_id":46289903943893,"sku":"sku-41279444877495","price":70.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 1kg","offer_id":46289904566485,"sku":"sku-41279444943031","price":32.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0520\/1972\/4454\/files\/Scarlet-Red-PLA-Prime-coex3d-87086450.jpg?v=1711026493"},{"product_id":"translucent-blood-red-pla-prime","title":"COEX 3D Translucent Blood Red PLA Prime 3D Filament","description":"\u003ch1\u003eCOEX 3D Translucent Blood Red PLA Prime 3D Filament\u003c\/h1\u003e\n\u003cp\u003ePolylactic Acid is a biodegradable, eco-friendly plastic, known for its ease of use and low warpage quality. PLA Prime is Coex 3D's high performance PLA 3D printing filament. It is made from Natureworks Ingeo 3D850 and shows improved heat resistance, more toughness, good adhesion and less warping or curling than traditional PLA. PLA was always the go-to basic filament and is still recommended when you start your journey with 3D printing, without needing to change any of your profiles you can up your game by printing with Coex 3D PLA Prime - available in most standard PLA colors.\u003c\/p\u003e\n\u003cp\u003eThis high performance material will be perfect for that special print or prototype that you've been wanting to make but weren't sure if PLA was the best material for the job. Please realize though that all grades of PLA will still have limitations. If you truly need high strength and high heat resistance you may want to explore other materials for your project or part.\u003c\/p\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":46289646715093,"sku":"sku-41276029632695","price":32.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g","offer_id":46289903747285,"sku":"sku-41297266442423","price":24.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 5lb","offer_id":46289903911125,"sku":"sku-41279446155447","price":70.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 1kg","offer_id":46289904369877,"sku":"sku-41279446188215","price":32.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 5lb","offer_id":46289904697557,"sku":"sku-41279446220983","price":70.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0520\/1972\/4454\/files\/Translucent-Blood-Red-PLA-Prime-coex3d-87089254.jpg?v=1711026493"},{"product_id":"taxicab-yellow-pla-prime","title":"COEX 3D Taxicab Yellow PLA Prime 3D Filament","description":"\u003ch1\u003eCOEX 3D Taxicab Yellow PLA Prime 3D Filament\u003c\/h1\u003e\n\u003cp\u003ePolylactic Acid is a biodegradable, eco-friendly plastic, known for its ease of use and low warpage quality. PLA Prime is Coex 3D's high performance PLA 3D printing filament. It is made from Natureworks Ingeo 3D850 and shows improved heat resistance, more toughness, good adhesion and less warping or curling than traditional PLA. PLA was always the go-to basic filament and is still recommended when you start your journey with 3D printing, without needing to change any of your profiles you can up your game by printing with Coex 3D PLA Prime - available in most standard PLA colors.\u003c\/p\u003e\n\u003cp\u003eThis high performance material will be perfect for that special print or prototype that you've been wanting to make but weren't sure if PLA was the best material for the job. Please realize though that all grades of PLA will still have limitations. If you truly need high strength and high heat resistance you may want to explore other materials for your project or part.\u003c\/p\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":46289646780629,"sku":"sku-41279445369015","price":32.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 5lb","offer_id":46289903026389,"sku":"sku-41279445401783","price":70.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0520\/1972\/4454\/files\/Taxicab-Yellow-PLA-Prime-coex3d-154018440.jpg?v=1711026493"},{"product_id":"white-asa-prime","title":"COEX 3D White ASA Prime 3D Filament","description":"\u003ch1\u003eCOEX 3D White ASA Prime 3D Filament\u003c\/h1\u003e\n\u003cp\u003eExperience Durability with White ASA Prime\u003c\/p\u003e\n\u003cp\u003eASA filament (acrylonitrile styrene acrylate) is a thermoplastic 3D printing material that is perfect in many ways and is suitable for many different applications. It has a similar chemical makeup to ABS plastic but offers three notable improvements: better mechanical properties, it is naturally UV resistant, and it simply produces amazing finished prints. Coex 3D offers ASA in the same colors as ABS giving you 11 colors to choose from and is available in both 1.75mm and 2.85mm diameters in varying spool sizes.\u003c\/p\u003e\n\u003cp\u003eAlthough ASA can safely be printed using an open bed printer, it is still recommended to print ASA in an enclosed printer which will allow parts to cool slowly and uniformly which helps to prevent shrinkage and warping.\u003c\/p\u003e\n\u003cp\u003eCoex 3D’s ASA products are made with 100% virgin resin and high-quality colorants with no added fillers. All Coex 3D filament is made in a production facility in Green Bay, WI, USA using industrial-grade extruders and laser measuring quality control to ensure quality and consistency with every spool.\u003c\/p\u003e\n\u003cp\u003eLooking for a high-performance 3D printing polymer that provides excellent UV stability and weather resistance? Look no further than White ASA Prime, the perfect choice for your 3D printing needs.\u003c\/p\u003e\n\u003cp\u003eCoex 3D White ASA Prime is an Acrylonitrile Styrene Acrylate (ASA) polymer that is specifically formulated for 3D printing. It offers the ideal balance of mechanical strength, toughness, stiffness, and weather resistance that you can rely on for extended periods.\u003c\/p\u003e\n\u003cp\u003eWhite ASA Prime is well-suited for outdoor and automotive applications thanks to its exceptional weather resistance and UV stability. Coex 3D ASA polymer is perfect for creating functional prototypes, end-use parts, and low-volume production runs.\u003c\/p\u003e\n\u003cp\u003eIf you are looking for a material that can withstand harsh weather conditions, retain its color and mechanical properties in direct sunlight, and provide long-lasting performance, then White ASA Prime is the right choice for you. With its easy-to-print characteristics and excellent layer adhesion, this ASA filament offers great value for money.\u003c\/p\u003e\n\u003cp\u003eGet your hands on White ASA Prime today and experience the optimal balance of rigidity, toughness, UV resistance, and weather ability. Buy now and start creating durable, high-quality 3D prints that will last for years to come!\u003c\/p\u003e\n\u003cp\u003eCoex 3D recommends the following print settings when printing with this ASA. Settings will vary depending on your specific printing setup.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHotend Temperature: 235 °C - 245 °C\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eImportant! This temperature range may seem hotter than you're used to for other ASA filaments. Using 100% virgin resin causes Coex 3D ASA to require slightly higher printing temperatures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeated Bed Temperature: 80 °C - 1000 °C\u003c\/li\u003e\n\u003cli\u003eRecommended Build Surfaces\/Adhesives\n\u003cul\u003e\n\u003cli\u003eGlass Build Surface\u003c\/li\u003e\n\u003cli\u003ePEI Build Surface\u003c\/li\u003e\n\u003cli\u003eMagigoo\u003c\/li\u003e\n\u003cli\u003ePainter's Tape\u003c\/li\u003e\n\u003cli\u003eGlue Stick\u003c\/li\u003e\n\u003cli\u003eABS slurry\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eCooling Fan: Recommended.\u003c\/li\u003e\n\u003cli\u003eEnclosure: Recommended to prevent warping\u003c\/li\u003e\n\u003cli\u003eDrying: ASA filament is hygroscopic and will absorb moisture from the air if not stored in a dry environment. If this happens, you may experience under-extrusion\/inconsistent extrusion or excess stringing. You may also hear a \"popping\" sound coming from the hotend during printing. Coex 3D recommends drying ASA at 65 °C for at least 3 hours if it has been exposed to excess humidity.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":46289647141077,"sku":"sku-41868041453751","price":34.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g","offer_id":46289902960853,"sku":"sku-41868041420983","price":21.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 1kg","offer_id":46289903124693,"sku":"sku-41868041486519","price":34.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 5lb","offer_id":46289903517909,"sku":"sku-41908207911095","price":75.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 5lb","offer_id":51983488418005,"sku":"CX04-0200-30-5LB","price":75.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0520\/1972\/4454\/files\/White-ASA-Prime-COEX-3D-87125676.jpg?v=1711026493"},{"product_id":"white-pla","title":"COEX 3D White PLA 3D Filament","description":"\u003ch1\u003eCOEX 3D White PLA 3D Filament\u003c\/h1\u003e\n\u003cp\u003eThe most environment-friendly 3D filament solution. Because of its low toxicity and ease of printing, PLA (Polylactic Acid) filament is a very popular choice in the 3D printing community. It looks great, is extremely easy to print with, and has generally good mechanical properties. It's perfect for prototypes and decorative models.\u003c\/p\u003e\n\u003cp\u003eCoex 3D White PLA is made with Virgin NatureWorks USA Ingeo resin and high-quality colorant only, with no fillers. All of Coex's filament is made in a production facility located in Wisconsin, USA. Coex 3D uses industrial-grade extruders and laser measuring quality control to ensure quality, consistency, and a 1.75±0.03mm diameter specification with every spool. Coex 3D provides filament that gives excellent-looking and strong prints.\u003c\/p\u003e\n\u003cp\u003eCoex 3D recommends the following print settings when printing with this PLA. Settings will vary depending on your specific printing setup.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHotend Temperature: 215 °C - 235 °C\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eImportant! This temperature range may seem hotter than you're used to for other PLA filaments. Using 100% virgin resin causes our PLA to require slightly higher printing temperatures.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eHeated Bed Temperature: 40 °C - 60 °C\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eNote: A heated bed is not a strict requirement when printing PLA, but using one is recommended.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eRecommended Build Surfaces\/Adhesives\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eGlass Build Surface\u003c\/li\u003e\n\u003cli\u003ePEI Build Surface\u003c\/li\u003e\n\u003cli\u003eMagigoo\u003c\/li\u003e\n\u003cli\u003ePainter's Tape\u003c\/li\u003e\n\u003cli\u003eGlue Stick\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eCooling Fan: Recommended. Up to 100% fan speed is advisable when printing PLA.\u003c\/li\u003e\n\u003cli\u003eDrying: PLA filament is hygroscopic and will absorb moisture from the air if not stored in a dry environment. If this happens, you may experience under-extrusion\/inconsistent extrusion or excess stringing. You may also hear a \"popping\" sound coming from the hotend during printing. Coex 3Ds recommend drying PLA at 55 °C for at least 3 hours if it has been exposed to excess humidity.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":46551365648597,"sku":"sku-41297286627511","price":24.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g","offer_id":46551366336725,"sku":"sku-41276017803447","price":19.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 5lb","offer_id":46551367155925,"sku":"sku-41297286660279","price":54.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 9lb","offer_id":46551367712981,"sku":"sku-41297286693047","price":97.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 15lb","offer_id":46551368466645,"sku":"sku-41297286725815","price":162.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 1kg","offer_id":46551369482453,"sku":"sku-41297286758583","price":24.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 5lb","offer_id":46551370137813,"sku":"sku-41297286791351","price":54.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 9lb","offer_id":46289904337109,"sku":"sku-41297286824119","price":97.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 15lb","offer_id":46551370858709,"sku":"sku-41297286856887","price":162.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 22lb","offer_id":54125988872405,"sku":"CX02-0200-30-22LB","price":240.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0520\/1972\/4454\/files\/White-PLA-coex3d-87084456.jpg?v=1711026494"}],"url":"https:\/\/www.whiterosehobbies.com\/collections\/3d-printing.oembed","provider":"White Rose Hobbies","version":"1.0","type":"link"}